Murray 629108X89A Snow Blower Thrower Parts
The Murray 629108X89A is a gas-powered, two-stage snow thrower popular for its reliability and ability to handle moderate to heavy snowfall. Typically manufactured in the late 2000s and early 2010s, this model offers a substantial clearing width, making it suitable for both residential driveways and smaller commercial properties. Its robust design and efficient snow-throwing capabilities made it a favorite among homeowners and snow removal professionals alike.
The Murray 629108X89A snow thrower was a popular model known for its dependable performance and ease of use. Production years generally spanned the late 2000s to early 2010s. The engine is typically a Briggs & Stratton or Tecumseh gas engine, usually in the 8-10 HP range. Some models offered an electric start option for added convenience. Being a two-stage snow blower, it utilizes a robust auger to gather snow and an impeller to powerfully discharge it through the chute. The 629108X89A typically features a clearing width of around 26-28 inches and an intake height of approximately 20-21 inches, enabling it to tackle deeper snowdrifts. Expect throwing distances up to 30-35 feet, depending on snow conditions. Drive systems are typically wheel-driven, offering multiple forward and reverse speeds for optimal control. Chute controls are generally manual, allowing users to adjust the direction and angle of the snow stream. While features like headlights or heated grips are not standard on all models, some versions may include a headlight. This model is well-suited for handling moderate to heavy snowfalls on driveways, walkways, and smaller commercial lots. Its two-stage design allows it to efficiently process wet, heavy snow without excessive clogging.
Specifications
| Engine | Briggs & Stratton/Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 2000s - Early 2010s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn parts promptly to maintain optimal performance.
- Check shear pins frequently and replace them immediately if broken. Use only the correct shear pins specified for your model.
- Ensure proper belt tension on the drive and auger belts. Adjust as needed to prevent slippage and maximize power transfer.
- Before storing the snow blower for the off-season, drain the fuel or add fuel stabilizer to prevent fuel-related issues. Change the engine oil annually to keep it running smoothly. Adjust the skid shoes to prevent scraping.
History & Background
The Murray 629108X89A was introduced as a mid-range snow thrower designed to offer a balance of power and affordability. While there weren't significant redesigns during its production run, minor improvements may have been implemented over the years. It gained popularity as a reliable option for homeowners seeking a capable snow removal solution without breaking the bank.
Frequently Asked Questions
What engine is in the Murray 629108X89A?
The Murray 629108X89A typically features a Briggs & Stratton or Tecumseh gas engine, ranging from 8 to 10 horsepower. Some models offer an electric start option for easier starting in cold weather.
What is the clearing width of the 629108X89A?
The Murray 629108X89A boasts a clearing width of approximately 26 inches and an intake height of around 21 inches. This allows it to efficiently clear snow from driveways and walkways.
Is the 629108X89A a single-stage or two-stage snow blower?
The 629108X89A is a two-stage snow blower. It uses an auger to gather snow and then an impeller to powerfully throw the snow through the discharge chute. This two-stage design allows it to handle heavier and wetter snow conditions more effectively than a single-stage model.
What are common parts needed for the 629108X89A?
Common replacement parts for the Murray 629108X89A include shear pins, drive belts, auger belts, auger paddles (rubber/plastic), the scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and extends the life of your snow blower.
