Murray 629108X61E Snow Blower Thrower Parts
The Murray 629108X61E is a gas-powered, two-stage snow thrower known for its reliable performance in residential snow removal. Manufactured in the early 2000s, this model typically features a 26-inch clearing width, making it suitable for driveways and sidewalks. Its two-stage design allows it to handle moderate to heavy snowfall effectively.
The Murray 629108X61E snow thrower was a popular choice for homeowners seeking a balance between power and affordability. Produced in the early 2000s, this model utilized a Briggs & Stratton engine, often around 8-10 HP, with some versions offering electric start for easier cold-weather starts. As a two-stage snow thrower, it employed an auger to collect snow and an impeller to throw it, providing efficient snow removal. The clearing width is typically 26 inches, with an intake height around 20 inches, allowing it to handle deeper snowfalls. Throwing distance can reach up to 30-40 feet depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds for maneuverability. Chute control is usually manual, allowing the operator to direct the snow stream. Many models included a headlight for improved visibility during nighttime snow removal. While heated grips were not a standard feature, the 629108X61E is well-suited for clearing driveways, sidewalks, and patios in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200 lbs |
| Years Produced | Early 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for any signs of damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check shear pins frequently and replace them if they are broken. Using the correct shear pins is crucial to protect the auger and gearbox.
- Ensure proper belt tension for both the auger and drive systems. Loose belts can lead to reduced performance and premature wear.
- Use fuel stabilizer in the off-season to prevent fuel degradation and carburetor issues. Drain the fuel tank or run the engine until it stalls before storing for extended periods.
History & Background
The Murray 629108X61E was introduced in the early 2000s as a mid-range offering in Murray's snow blower lineup. While it did not undergo significant redesigns during its production run, it remained a consistent and reliable option for homeowners due to its durable construction and efficient snow-clearing capabilities.
Frequently Asked Questions
What engine is in the Murray 629108X61E?
The Murray 629108X61E typically uses a Briggs & Stratton engine around 8 horsepower. Some models also featured an electric start option for easier starting in cold weather.
What is the clearing width of the 629108X61E?
The Murray 629108X61E has a clearing width of 26 inches and an intake height of approximately 20 inches.
Is the 629108X61E a single-stage or two-stage snow blower?
The Murray 629108X61E is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow away from the machine.
What are common parts needed for the 629108X61E?
Common parts needed for the Murray 629108X61E include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
