Murray 629108X5A Snow Blower Thrower Parts
The Murray 629108X5A is a popular gas-powered two-stage snow thrower designed for both residential and light commercial use. Known for its reliability and ease of use, this model offers a generous clearing width and powerful engine to tackle moderate to heavy snowfall. While exact manufacturing years may vary, it was produced during the late 2000s and early 2010s, filling the need for a dependable snow removal solution.
The Murray 629108X5A snow thrower was a mainstay in Murray's lineup, offering a balance of power and affordability for homeowners and property managers. Its production run primarily spanned the late 2000s and early 2010s. Powered by a Briggs & Stratton or Tecumseh gas engine (likely around 8-10 HP or 205-250cc), some versions included an electric start option for easier cold-weather starts. As a two-stage snow thrower, it utilizes an auger to break up the snow and an impeller to throw it further away from the clearing path. The clearing width is approximately 26 inches, with an intake height of around 20-21 inches, allowing it to handle substantial snowfalls. Expect a throwing distance of up to 30-35 feet depending on snow conditions. It typically features a wheel-drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute controls are usually manual, allowing the operator to adjust the direction of the snow discharge. Some models may have included a headlight for improved visibility during early morning or evening snow removal. This snow blower is ideal for homeowners and light-duty commercial users dealing with moderate to heavy snow accumulation on driveways, walkways, and parking areas.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP (205-250cc) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 2000s - Early 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if they break. Use only the correct shear pins specified for this model to prevent damage to the auger gearbox.
- Fuel Stabilization: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray 629108X5A was introduced as a reliable mid-range two-stage snow thrower aimed at the residential market. It aimed to offer a compelling blend of power, features, and value. While not groundbreaking in its design, its dependable performance and readily available parts contributed to its popularity among homeowners.
Frequently Asked Questions
What engine is in the Murray 629108X5A?
The Murray 629108X5A typically features a Briggs & Stratton or Tecumseh gas engine, ranging from 8 to 10 horsepower (approximately 205-250cc). Some models offered an electric start option for added convenience.
What is the clearing width of the 629108X5A?
The Murray 629108X5A boasts a clearing width of 26 inches and an intake height of 21 inches, allowing it to efficiently clear snow from driveways and walkways.
Is the 629108X5A a single-stage or two-stage snow blower?
The Murray 629108X5A is a two-stage snow blower. It uses an auger to break up and gather the snow, and then an impeller to powerfully throw the snow away from the cleared area. This system is more effective for handling heavier and deeper snow.
What are common parts needed for the 629108X5A?
Commonly needed parts for the Murray 629108X5A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts helps maintain the snow blower's performance and longevity.
