Murray 629108X31A Snow Blower Thrower Parts
The Murray 629108X31A is a gas-powered, two-stage snow thrower designed for both residential and light commercial snow removal. With a 26-inch clearing width, this model, popular in the late 2000s and early 2010s, offers a balance of power and maneuverability. Its two-stage design allows it to handle heavier snowfalls with ease, making it a reliable choice for homeowners and property managers alike.
The Murray 629108X31A snow thrower was a popular model produced in the late 2000s and early 2010s. It's powered by a Briggs & Stratton engine, typically around 9.5 HP or 205cc, often with an electric start option for easier cold-weather starts. Being a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. This model features a 26-inch clearing width and an intake height of around 20 inches, allowing it to handle moderate to heavy snowfalls. The throwing distance can reach up to 30-40 feet depending on snow conditions. It typically features a wheel drive system with multiple forward speeds and reverse speeds for enhanced control. The chute control is usually manual, allowing the operator to adjust the direction and angle of the snow stream. Some models may include a headlight for improved visibility during nighttime operation. The 629108X31A is ideal for homeowners with medium to large driveways and sidewalks, as well as property managers needing to clear walkways and parking areas. It performs best in moderate to heavy snow conditions.
Specifications
| Engine | Briggs & Stratton 205cc Electric Start (Y/N depends on sub-model) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 2000s - Early 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace damaged parts immediately to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break if the auger encounters a hard object. Always keep spare shear pins on hand and replace them immediately if they break to prevent damage to the auger and transmission.
- Change Oil Regularly: Follow the manufacturer's recommended oil change schedule. Using fresh oil ensures proper lubrication and prolongs the life of the engine. Consider using fuel stabilizer during off-season storage.
History & Background
The Murray 629108X31A was introduced as a mid-range two-stage snow blower. This model aimed to provide a robust and reliable solution for typical winter snowfalls. While there were no significant redesigns during its production run, minor updates and variations may have existed across different model years, primarily concerning engine configurations and included features.
Frequently Asked Questions
What engine is in the Murray 629108X31A?
The Murray 629108X31A typically uses a Briggs & Stratton engine with a displacement of around 205cc. Some models are equipped with an electric start feature for easier starting in cold weather.
What is the clearing width of the 629108X31A?
The Murray 629108X31A has a clearing width of 26 inches and an intake height of approximately 20 inches.
Is the 629108X31A a single-stage or two-stage snow blower?
The Murray 629108X31A is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller throws the snow out of the chute.
What are common parts needed for the 629108X31A?
Common wear parts for the Murray 629108X31A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and longevity of the snow blower.
