Murray 629104X85C Snow Blower Thrower Parts
The Murray 629104X85C is a gas-powered, two-stage snow thrower designed for both residential and light commercial use. Likely manufactured in the late 1990s and early 2000s, it features a respectable clearing width, making it popular for tackling moderate to heavy snowfall on driveways and walkways. Its robust design and readily available parts contribute to its continued appeal for homeowners and snow removal professionals.
The Murray 629104X85C snow thrower, a prominent model from the late 20th and early 21st centuries, was built for dependable snow clearing. It's generally equipped with a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower. Many models feature an electric start option for easy starting in cold weather. Being a two-stage snow blower, it utilizes an auger to break up the snow and an impeller to throw it through the chute. The clearing width is typically around 26 inches, with an intake height of approximately 20 inches, allowing it to handle significant snowfalls. The throwing distance can reach up to 30 feet depending on the snow conditions. Most models have a wheel drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute is usually manually controlled, though some variations might have power chute controls. A headlight enhances visibility during early morning or evening snow removal. While heated grips weren't standard on this model, the 629104X85C is ideally suited for handling moderate to heavy snowfalls on medium to large driveways and walkways.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown Gallons |
| Weight | Unknown Lbs |
| Years Produced | Late 1990s - Early 2000s (Approx.) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep extra shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Fuel Stabilization: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Check and Adjust Skid Shoes: Ensure the skid shoes are properly adjusted to prevent damage to the scraper bar and the surface you are clearing. Adjust as needed based on the surface type.
History & Background
The Murray 629104X85C was introduced as a dependable two-stage snow thrower designed for residential use. While specific redesigns are difficult to pinpoint without exact production years, the model remained relatively consistent throughout its production run. Its reliable performance and widespread availability made it a popular choice for homeowners needing a capable snow removal solution.
Frequently Asked Questions
What engine is in the Murray 629104X85C?
The Murray 629104X85C typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. Some models may have an optional electric start feature.
What is the clearing width of the 629104X85C?
The Murray 629104X85C has a clearing width of approximately 26 inches and an intake height of around 20 inches.
Is the 629104X85C a single-stage or two-stage snow blower?
The Murray 629104X85C is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 629104X85C?
Commonly needed parts for the Murray 629104X85C include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
