Murray 627904X89C Snow Blower Thrower Parts
The Murray 627904X89C is a gas-powered, two-stage snow blower known for its reliability and efficient snow removal capabilities. While exact production years may vary, it typically features a clearing width around 26 inches, making it a popular choice for homeowners dealing with moderate to heavy snowfall. Its two-stage design allows it to handle a variety of snow conditions, from light powder to heavier, wetter snow.
The Murray 627904X89C snow blower, designed for both residential and light commercial use, became a staple for many due to its blend of power and maneuverability. Production years varied, but the model's core design remained consistent. Typically, it's powered by a Briggs & Stratton or similar engine, often ranging from 8 to 10 horsepower, delivering ample power for most snow clearing tasks. Some models offer an electric start option for added convenience in colder temperatures. As a two-stage snow blower, the 627904X89C uses an auger to break up and gather snow, then a separate impeller to forcefully discharge it. Clearing width is usually around 26 inches, with an intake height of approximately 20-21 inches, allowing it to tackle deeper snowdrifts. The machine can throw snow up to 30-35 feet, depending on snow density and conditions. Its wheel-drive system generally includes multiple forward speeds and reverse, providing controlled movement in varying snow conditions. Most models use a manual chute control to adjust the direction and angle of snow discharge. While a headlight and heated grips are not standard, aftermarket accessories are available for enhanced visibility and comfort. The Murray 627904X89C is well-suited for clearing driveways, sidewalks, and patios in regions with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Varies |
Maintenance Tips
- Inspect the auger and impeller regularly for damage and wear, replacing worn paddles or auger blades as needed to maintain optimal performance.
- Always use the correct shear pins and replace them immediately if broken to prevent damage to the auger gearbox. Using incorrect shear pins can lead to costly repairs.
- Check belt tension and replace worn or cracked belts to ensure proper power transmission to the auger and impeller. Refer to your owner's manual for proper belt routing and tensioning procedures.
- Use fuel stabilizer in the gasoline during off-season storage to prevent fuel degradation and carburetor issues. Change the engine oil annually or as recommended by the engine manufacturer.
History & Background
The Murray 627904X89C snow blower was introduced as a mid-range option offering a balance of power and affordability. While there weren't major redesigns during its production run, minor improvements and component updates occurred over the years. This model became a popular choice among homeowners seeking a reliable two-stage snow blower without the premium price tag of more advanced models.
Frequently Asked Questions
What engine is in the Murray 627904X89C?
The Murray 627904X89C is typically equipped with a Briggs & Stratton gas engine, ranging from 8 to 10 horsepower. Some models may offer an electric start option for easier starting in cold weather.
What is the clearing width of the 627904X89C?
The Murray 627904X89C has a clearing width of approximately 26 inches and an intake height of around 21 inches.
Is the 627904X89C a single-stage or two-stage snow blower?
The Murray 627904X89C is a two-stage snow blower. It uses an auger to collect and break up the snow, and then a separate impeller to throw the snow through the discharge chute.
What are common parts needed for the 627904X89C?
Commonly needed parts for the Murray 627904X89C include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
