Murray 627904X89B Snow Blower Thrower Parts
The Murray 627904X89B is a robust gas-powered two-stage snow thrower, likely manufactured in the late 2000s and early 2010s, designed for both residential and light commercial use. Known for its reliable performance and straightforward operation, this model typically features a 26-inch clearing width, making it a popular choice for homeowners dealing with moderate to heavy snowfall. Its two-stage design efficiently chews through drifts and throws snow a considerable distance.
The Murray 627904X89B snow thrower was a common sight in suburban driveways during its production run. While the exact production years may vary, it was prevalent from the late 2000s into the early 2010s. These models are powered by a [Specific Engine Brand, e.g., Briggs & Stratton] gas engine, typically in the [Specific HP, e.g., 8-10 HP] range. Many variations include an electric start option for easier cold-weather starts. The 627904X89B is a two-stage snow blower, meaning it uses an auger to gather snow and then an impeller to throw it out of the chute. The auger system is designed to break up compacted snow and ice, feeding it to the impeller. The clearing width is generally 26 inches, with an intake height of around [Specific Height, e.g., 20-21 inches], allowing it to handle moderately deep snow. Throwing distance can reach up to [Specific Distance, e.g., 30-40] feet. The drive system is typically wheel-driven, offering multiple forward and reverse speeds, giving the operator control in varying snow conditions. Chute controls are usually manual, allowing for directional adjustments of the snow stream. Some models might include a headlight for improved visibility during nighttime or early morning snow removal. While heated grips are not a standard feature, the 627904X89B is well-suited for areas with moderate to heavy snowfall on paved or gravel surfaces.
Specifications
| Engine | Briggs & Stratton 9 HP Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 2000s - Early 2010s (Estimate) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn paddles or blades to maintain optimal performance.
- Check the shear pins frequently and replace them if they are broken or sheared off. Using the correct shear pins is crucial to protect the auger gearbox.
- Maintain proper belt tension on the drive and auger belts. Loose belts can slip and reduce snow throwing efficiency.
- Change the engine oil annually, following the manufacturer's recommendations for oil type and viscosity. Adding fuel stabilizer to the gasoline before off-season storage prevents fuel degradation.
History & Background
The Murray 627904X89B emerged as a popular two-stage snow blower in the late 2000s, offering a balance of power and affordability for homeowners. While precise redesign details are scarce, Murray likely made incremental improvements over its production run. Its significance lies in providing a reliable and accessible option for tackling significant snowfall, contributing to Murray's reputation in the snow removal equipment market.
Frequently Asked Questions
What engine is in the Murray 627904X89B?
The Murray 627904X89B typically uses a Briggs & Stratton engine in the 8-10 HP range. Many models feature an electric start option for easier starting in cold weather.
What is the clearing width of the 627904X89B?
The Murray 627904X89B has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the 627904X89B a single-stage or two-stage snow blower?
The 627904X89B is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller throws the snow through the discharge chute.
What are common parts needed for the 627904X89B?
Common replacement parts include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance of these parts will keep your snow blower running smoothly.
