Murray 627855X110A-SN927 Snow Blower Thrower Parts
The Murray 627855X110A - SN927 snow blower, also known as the SN927, was a popular model known for its reliable performance in tackling moderate snowfall. Typically manufactured with a gas-powered engine, this two-stage snow thrower offered a generous clearing width for efficient snow removal on residential driveways and walkways. Its combination of power and user-friendly features made it a favorite among homeowners during its production run.
The Murray 627855X110A - SN927 snow blower was designed for homeowners needing a reliable solution for clearing snow from driveways and walkways. While exact production years are difficult to pinpoint without serial number databases, it likely saw production during the late 1990s and early 2000s. This model typically featured a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower, some with an optional electric start. As a two-stage snow blower, it employs an auger to break up the snow and an impeller to throw it further away from the clearing path. The auger system is designed to pull snow into the housing, where the high-speed impeller propels it through the discharge chute. Expect a clearing width around 26 inches and an intake height of around 20 inches, allowing it to handle moderate snowfalls. The throwing distance could reach up to 30 feet, depending on snow conditions. Drive systems were wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. The chute rotation was typically manually controlled. While not equipped with headlights or heated grips, its robust design and practical features made it well-suited for residential use in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8 HP Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal snow-throwing performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if they break. Shear pins protect the auger gearbox from damage if the auger encounters a hard object.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and carburetor issues.
History & Background
The Murray SN927 snow blower was a popular model in the Murray lineup, known for offering a balance of power and affordability. While specific dates are unavailable, it was likely introduced in the late 1990s or early 2000s and contributed to Murray's presence in the residential snow removal market. It offered a cost-effective solution for homeowners compared to more expensive professional-grade machines.
Frequently Asked Questions
What engine is in the Murray 627855X110A - SN927?
The Murray 627855X110A - SN927 typically features a Tecumseh 8 HP engine. Electric start models were also available.
What is the clearing width of the 627855X110A - SN927?
The clearing width of the Murray 627855X110A - SN927 is 26 inches, and the intake height is approximately 20 inches.
Is the 627855X110A - SN927 a single-stage or two-stage snow blower?
The Murray 627855X110A - SN927 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow through the chute.
What are common parts needed for the 627855X110A - SN927?
Common replacement parts for the Murray 627855X110A - SN927 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
