Murray 627852X85A Snow Blower Thrower Parts
The Murray 627852X85A is a gas-powered, two-stage snow thrower designed for efficient snow removal. With a [fill in actual spec if available, else estimate 26-28 inch] clearing width, this model, manufactured in [fill in actual year range if available, else estimate late 1990s-early 2000s], gained popularity among homeowners for its reliable performance and ability to handle moderate to heavy snowfall. Its two-stage design allows it to chew through deep snow and throw it a considerable distance.
The Murray 627852X85A is a two-stage snow blower intended for both residential and light commercial use, likely produced from the late 1990s to early 2000s. While precise production years are difficult to pinpoint, it represents a popular class of snow blowers designed for tackling moderate to heavy snow. The engine is likely a Tecumseh or Briggs & Stratton gas engine, producing around 8-10 HP, potentially with an optional electric start feature for easy cold-weather starting. The two-stage auger system consists of a serrated steel auger that breaks up the snow and feeds it into a high-speed impeller, which then throws the snow out of the discharge chute. The clearing width is estimated to be between 26 and 28 inches, with an intake height of approximately 20-21 inches, allowing it to handle decent snow depths. Throwing distance could be expected to reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds controlled by a gear shift. Chute rotation is generally manual, requiring the operator to physically adjust the chute direction. While this model may not feature a headlight or heated grips (depending on the specific configuration), its robust construction and powerful engine make it suitable for clearing driveways, sidewalks, and other surfaces with moderate to heavy snowfall. Ideal snow conditions for the 627852X85A would be accumulations of 6-18 inches of dry to moderately wet snow.
Specifications
| Engine | Tecumseh or Briggs & Stratton 8-10 HP (Estimated) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches (Estimated) |
| Intake Height | 20-21 inches (Estimated) |
| Throwing Distance | Up to 30-40 ft (Estimated) |
| Drive System | Wheel - 5-6 Forward / 1-2 Reverse (Estimated) |
| Fuel Tank | 1.5 gallons (Estimated) |
| Weight | 200-220 lbs (Estimated) |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage. Look for bent or broken paddles, as these can significantly reduce snow-throwing performance.
- Always use the correct shear pins. Using the wrong shear pins, or bolts, can damage the auger gearbox. Keep spare shear pins on hand.
- Check and adjust belt tension periodically. Loose belts can slip, reducing power to the auger and impeller. Refer to your owner's manual for proper belt tensioning procedures.
- Use fuel stabilizer during off-season storage. Stabilizer prevents fuel from degrading and gumming up the carburetor, making it easier to start the snow blower when winter arrives.
History & Background
The Murray 627852X85A was part of Murray's line of snow blowers designed for residential use. While detailed information on specific updates or redesigns is scarce, this model represented a common configuration for two-stage snow blowers during its production run. It provided a balance of power and affordability, contributing to Murray's presence in the snow removal equipment market.
Frequently Asked Questions
What engine is in the Murray 627852X85A?
The Murray 627852X85A typically used either a Tecumseh or Briggs & Stratton gas engine, producing approximately 8-10 horsepower. An electric start option may have been available on some models.
What is the clearing width of the 627852X85A?
The estimated clearing width of the Murray 627852X85A is between 26 and 28 inches, with an intake height of around 20-21 inches. This allows it to handle a good amount of snow in a single pass.
Is the 627852X85A a single-stage or two-stage snow blower?
The Murray 627852X85A is a two-stage snow blower. This means it uses a steel auger to break up the snow and then an impeller to throw it out of the discharge chute. The two-stage design makes it more effective at handling heavier, wetter snow and throwing it further than a single-stage model.
What are common parts needed for the 627852X85A?
Common wear parts for the Murray 627852X85A include shear pins (for the auger), drive belts and auger belts, auger paddles (if equipped with rubber paddles), scraper bar, skid shoes, spark plugs, and fuel filters. Replacing these parts regularly will help keep your snow blower running smoothly.
