Murray 627809X5A Snow Blower Thrower Parts
Find parts for your Murray 627809X5A Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Murray 627809X5A is a gas-powered, two-stage snow thrower designed for efficient snow removal. Although exact production dates are difficult to pinpoint, this model, or similar iterations, likely saw production spanning the late 1990s through the early 2000s. Known for its robust construction and effective clearing width, it offered homeowners and property managers a reliable solution for tackling moderate to heavy snowfall.
About the 627809X5A
The Murray 627809X5A snow thrower, part of Murray's line of residential and light-commercial snow removal equipment, was designed for ease of use and durability. While the precise production years can vary based on dealer stock, similar models were likely manufactured from the late 1990s to the early 2000s. Typically, this model features a Briggs & Stratton or Tecumseh engine, likely in the 5-8 HP range, offering sufficient power for typical snow removal tasks. Some versions may have included an electric start option for easier cold-weather starts. It's a two-stage snow blower, meaning it uses an auger to break up the snow and an impeller to throw it away from the machine. The clearing width is approximately 26 inches, with an intake height around 20 inches, allowing it to handle substantial snowfalls. The throwing distance depends on the snow consistency but can reach up to 30 feet. It utilizes a wheel drive system with multiple forward and reverse speeds, offering good maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow discharge. While heated grips and headlights may not be standard, some models could have included a basic headlight. The Murray 627809X5A is well-suited for homeowners and property managers dealing with moderate to heavy snowfall on driveways and walkways.
627809X5A Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 150-200 Lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s (approximate) |
627809X5A Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox. Replace them immediately if broken, using only the correct shear pin type.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
627809X5A History & Background
The Murray 627809X5A, or similar models in the Murray snow thrower lineup, were introduced to provide homeowners with a reliable and affordable solution for winter snow removal. While specific redesigns were less common during its production run, Murray focused on maintaining a robust design and offering variations in engine size and features. It held significance as a widely accessible and dependable snow removal option for residential use.
Frequently Asked Questions
Which motion drive belt fits the Murray 627809X5A snow blower?
For the Murray 627809X5A, the correct motion drive belt is 579932 - Belt, Motion Drive.
What is the recommended auger drive belt for the Murray 627809X5A?
The recommended auger drive belt for the Murray 627809X5A is 585416 - Belt, Bracket Auger Drive.
How often should the motion drive belt be inspected on a Murray 627809X5A?
The motion drive belt, such as 579932 - Belt, Motion Drive, should be inspected annually or before each season for wear and tension to ensure optimal performance.
What are common replacement parts for the Murray 627809X5A?
For the Murray 627809X5A, common replacement wear parts include the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive. Regular inspection and replacement of drive and auger belts will keep your snow blower running smoothly.










