Murray 627808X84A Snow Blower Thrower Parts
Find parts for your Murray 627808X84A Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Murray 627808X84A is a robust gas-powered two-stage snow blower designed for tackling moderate to heavy snowfall. Likely manufactured in the early to mid-2000s, this model boasts a respectable clearing width, making it a popular choice for homeowners and property managers needing reliable snow removal. Its durable construction and effective snow throwing capabilities made it a respected machine in its class.
About the 627808X84A
The Murray 627808X84A snow blower was a popular model known for its balance of power and ease of use. While exact production years can vary, it was likely manufactured during the early to mid-2000s. It typically featured a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower (approximately 170cc to 250cc), with some models offering an electric start option for convenient starting in cold weather. As a two-stage snow blower, it uses an auger to break up and collect snow, then an impeller to discharge it through the chute. The clearing width is generally around 26 inches, with an intake height of approximately 20-21 inches, allowing it to handle moderate to deep snow. The throwing distance can reach up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward speeds and reverse. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. While not always standard, some models may include a headlight for improved visibility during early morning or evening snow removal. Heated grips are unlikely on this model. The Murray 627808X84A is best suited for paved driveways and walkways and is effective in handling a variety of snow conditions, from light and fluffy to wet and heavy.
627808X84A Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP (170-250cc) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 180 lbs |
| Years Produced | Early to Mid 2000s |
627808X84A Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if they break to protect the auger and gearbox from damage.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and ensure easy starting next winter.
- Skid Shoe Adjustment: Adjust the skid shoes based on the surface you are clearing. Raise them for gravel driveways and lower them for paved surfaces to prevent damage.
627808X84A History & Background
The Murray 627808X84A snow blower was part of Murray's lineup of residential snow removal equipment. It aimed to provide a reliable and affordable option for homeowners. While not a revolutionary model, its solid construction and effective snow-clearing capabilities contributed to its popularity during its production run.
Frequently Asked Questions
Which motion drive belt fits the Murray 627808X84A?
The recommended motion drive belt for the Murray 627808X84A snow blower is 579932 - Belt, Motion Drive.
What replacement auger drive belt is recommended for the Murray 627808X84A?
For optimal performance, the replacement auger drive belt for the Murray 627808X84A is 585416 - Belt, Bracket Auger Drive.
Is the 627808X84A a single-stage or two-stage snow blower?
The Murray 627808X84A is a two-stage snow blower. It uses an auger to collect and break up snow, then an impeller to forcefully discharge it through the chute.
What are common parts needed for the 627808X84A?
Common replacement parts for the Murray 627808X84A include the motion drive belt, such as 579932 - Belt, Motion Drive, and the auger drive belt, such as 585416 - Belt, Bracket Auger Drive.










