Murray 627808X61D Snow Blower Thrower Parts
The Murray 627808X61D is a gas-powered, two-stage snow thrower popular for its balance of power and affordability. While specific production years vary, this model and its variants offered a 26-inch clearing width, making it suitable for homeowners and property managers dealing with moderate to heavy snowfall. Its robust engine and two-stage design provided efficient snow removal across different surface types.
The Murray 627808X61D snow blower was designed to provide reliable snow removal for residential properties. The exact production years varied, but it was a common model for several seasons. Typically, these units were equipped with a Briggs & Stratton or similar gas engine, offering around 8-10 HP. An electric start option was often available. This model is a two-stage snow blower, employing an auger to gather snow and an impeller to throw it. The clearing width is approximately 26 inches, with an intake height of around 20 inches. This allows it to handle moderate snowfalls with ease. Throwing distance could reach up to 30 feet depending on snow conditions. The drive system is wheel-driven, usually offering multiple forward and reverse speeds for maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction of the snow stream. While not always standard, some models featured a headlight for improved visibility during early morning or late evening snow removal. Heated grips were not a common feature on this model. The Murray 627808X61D is ideal for homeowners and smaller property managers dealing with average snowfall amounts on driveways and sidewalks.
Specifications
| Engine | Briggs & Stratton 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Varies |
Maintenance Tips
- Regularly inspect the auger and impeller for damage and wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and replace shear pins as needed. These protect the auger gearbox from damage if the auger encounters a hard object.
- Inspect the drive belts for wear and proper tension. Replace worn belts to ensure proper power transfer to the wheels and auger.
- Change the engine oil according to the manufacturer's recommendations (usually every season or after a certain number of hours). Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues.
History & Background
The Murray 627808X61D was introduced as a reliable and affordable option in the two-stage snow blower market. While there weren't major redesigns during its production run, component improvements were common. This model filled a need for homeowners needing a powerful snow blower at a competitive price point.
Frequently Asked Questions
What engine is in the Murray 627808X61D?
The Murray 627808X61D typically uses a Briggs & Stratton gas engine, with horsepower ranging from 8 to 10 HP. An electric start option was often available for easier starting in cold weather.
What is the clearing width of the 627808X61D?
The Murray 627808X61D has a clearing width of 26 inches and an intake height of approximately 20 inches.
Is the 627808X61D a single-stage or two-stage snow blower?
The Murray 627808X61D is a two-stage snow blower. This means it uses an auger to collect the snow and then an impeller to throw the snow out of the chute. This two-stage system allows it to handle deeper and heavier snow compared to single-stage models.
What are common parts needed for the 627808X61D?
Common replacement parts for the Murray 627808X61D include shear pins (for the auger), drive belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will help ensure optimal performance and longevity.
