Murray 627808X5C Snow Blower Thrower Parts
The Murray 627808X5C is a gas-powered, two-stage snow thrower known for its reliability and efficiency in handling moderate to heavy snowfall. Typically manufactured in the late 2000s, this model features a 26-inch clearing width, making it suitable for clearing driveways and walkways quickly. Its robust design and user-friendly controls contributed to its popularity among homeowners and snow removal professionals alike.
The Murray 627808X5C snow thrower was a popular model produced by Murray, primarily targeting residential snow removal needs. While the exact production years may vary, it was commonly available in the late 2000s. The engine is typically a Briggs & Stratton or Tecumseh engine, ranging from 5 to 7 horsepower, offering sufficient power for its clearing capabilities. An electric start option was often available, adding convenience in cold weather. Being a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw the snow further away from the cleared area. This model features a 26-inch clearing width and an intake height of approximately 20 inches, allowing it to handle significant snowfall. The throwing distance can reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds, providing good maneuverability. Chute control is typically manual, allowing the operator to direct the snow stream. While heated grips and headlights weren't always standard, they were sometimes available as options. The Murray 627808X5C is best suited for areas with moderate to heavy snowfall, tackling driveways, walkways, and smaller commercial properties with ease.
Specifications
| Engine | Briggs & Stratton 6.5 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace any damaged parts to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox. Inspect them frequently and replace them immediately if broken to prevent serious damage.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing. Raise them for gravel or uneven surfaces to prevent damage.
History & Background
The Murray 627808X5C was introduced as a mid-range snow blower offering a balance of power and affordability. While specific redesigns were not common for this model, Murray focused on refining engine performance and user-friendliness over its production run. Its significance lies in providing a reliable and accessible option for homeowners needing to manage moderate to heavy snow accumulation.
Frequently Asked Questions
What engine is in the Murray 627808X5C?
The Murray 627808X5C typically uses a Briggs & Stratton engine around 6.5 horsepower. Electric start was often an available option for added convenience.
What is the clearing width of the 627808X5C?
The Murray 627808X5C boasts a clearing width of 26 inches and an intake height of 20 inches, allowing it to handle a decent amount of snow in one pass.
Is the 627808X5C a single-stage or two-stage snow blower?
The Murray 627808X5C is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller throws the snow out of the chute. This system is more effective for heavier snow conditions.
What are common parts needed for the 627808X5C?
Commonly needed parts for the Murray 627808X5C include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts helps maintain optimal performance.
