Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 627805X85D Snow Blower Thrower Parts

Replacement parts for the Murray 627805X85D Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Murray 627805X85D is a gas-powered, two-stage snow thrower commonly used for residential snow removal. Known for its reliable performance, this model offers a generous clearing width, making it efficient for clearing driveways and walkways. While exact production years may vary, it was a popular choice for homeowners seeking a durable and effective snow removal solution.

About the 627805X85D

The Murray 627805X85D snow thrower was designed for both homeowners and light commercial use. While specific production years are difficult to pinpoint without further information, it was likely produced during the late 1990s and early 2000s. Typically, these models featured a Briggs & Stratton or Tecumseh engine ranging from 5 to 8 HP, depending on the exact configuration. An electric start option might have been available on some models. As a two-stage snow thrower, it uses an auger to break up the snow and then an impeller to throw it through the chute. The clearing width usually ranged from 24 to 26 inches, with an intake height of around 20-21 inches, allowing it to handle moderate snowfall. Expect a throwing distance of up to 30 feet, depending on snow conditions. Most models use a wheel-drive system with multiple forward and reverse speeds. Chute control is typically manual, with a crank or lever to adjust the direction. Many models feature a headlight for improved visibility in low-light conditions. This model is best suited for paved surfaces and handles moderate to heavy snowfall effectively. Heated grips were not a standard feature on this model.

627805X85D Specifications

EngineBriggs & Stratton or Tecumseh 5-8 HP Electric Start Possible
Stage TypeTwo-Stage
Clearing Width24-26 inches
Intake Height20-21 inches
Throwing DistanceUp to 30 ft
Drive SystemWheel - Multiple Forward/Reverse
Fuel TankUnknown gallons
WeightUnknown lbs
Years ProducedLate 1990s - Early 2000s

627805X85D Maintenance Tips

  • Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal performance.
  • Check and Replace Shear Pins: Inspect shear pins after hitting any hard objects. Replace broken shear pins with the correct type to protect the auger and transmission.
  • Oil Changes and Fuel Stabilizer: Change the engine oil annually and add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation.
  • Adjust Skid Shoes: Adjust skid shoes based on the surface being cleared (paved or gravel) to prevent damage to the snow blower and the clearing surface.

627805X85D History & Background

The Murray 627805X85D was a popular model during its production run, offering a balance of performance and affordability. While no significant redesigns are known, Murray consistently updated its snow thrower lineup with incremental improvements. It played a significant role in providing homeowners with a reliable snow removal solution.

Frequently Asked Questions

Which motion drive belt fits the Murray 627805X85D snow blower?

The recommended motion drive belt for the Murray 627805X85D snow blower is 579932 - Belt, Motion Drive. This belt ensures proper power transmission for your snow blower's drive system.

Which auger drive belt is compatible with the Murray 627805X85D?

For the Murray 627805X85D, the correct auger drive belt is 585416 - Belt, Bracket Auger Drive. This belt is crucial for operating the auger system effectively.

What causes poor drive performance on the Murray 627805X85D?

Poor drive performance on your Murray 627805X85D can often be attributed to a worn or stretched 579932 - Belt, Motion Drive, which should be inspected and replaced if necessary.

What wear parts are commonly replaced on the Murray 627805X85D?

Key wear parts for the Murray 627805X85D include the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive. Regularly checking and replacing these components helps maintain your snow blower's performance.

Showing 1-2 of 2 products