Murray 627804X79B Snow Blower Thrower Parts
The Murray 627804X79B is a gas-powered, two-stage snow thrower popular for its balance of power and affordability during its production run. Typically featuring a clearing width around 26 inches, this model is designed to handle moderate to heavy snowfall on residential driveways and walkways. Its two-stage design efficiently chews through snow and throws it a considerable distance, making snow removal tasks easier and faster.
The Murray 627804X79B snow thrower was designed for homeowners seeking a reliable and powerful snow removal solution without breaking the bank. While exact production years may vary, it was a prominent model in the Murray lineup for several years. Typically powered by a Briggs & Stratton or similar engine in the 8-10 HP range (approximately 205-250cc), some versions offered an optional electric start for added convenience in cold weather. The two-stage design features an auger that breaks up the snow and feeds it to a high-speed impeller, which throws the snow out of the discharge chute. With a clearing width of around 26 inches and an intake height of approximately 20-21 inches, it can handle substantial snowfalls. Throwing distance can reach up to 30-40 feet depending on snow conditions. The drive system is typically wheel-driven with multiple forward and reverse speeds, offering good traction and maneuverability. Chute controls are generally manual, allowing the operator to adjust the direction and angle of the snow stream. Many models also feature a headlight for improved visibility during nighttime snow removal. While heated grips were not a standard feature on this model, its robust engine and two-stage design made it well-suited for tackling moderate to heavy snow accumulations on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Briggs & Stratton 9 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 2.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | (Varies - Check Model Number) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand. These pins protect the auger gearbox from damage if the auger encounters a hard object. Replace broken shear pins immediately.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from deteriorating and causing starting problems the following winter.
History & Background
The Murray 627804X79B was a popular model within the Murray snow thrower lineup, offering a balance of performance and value. While specific launch and discontinuation dates can fluctuate, it represents a standard design that Murray produced for a considerable time. It was a frequently purchased option for homeowners seeking a reliable two-stage snow removal machine.
Frequently Asked Questions
What engine is in the Murray 627804X79B?
The Murray 627804X79B typically features a Briggs & Stratton engine in the 8-10 HP range (around 205-250cc). Some models may have offered an electric start option.
What is the clearing width of the 627804X79B?
The Murray 627804X79B has a clearing width of approximately 26 inches and an intake height of around 21 inches.
Is the 627804X79B a single-stage or two-stage snow blower?
The 627804X79B is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow out of the chute.
What are common parts needed for the 627804X79B?
Common parts needed for the Murray 627804X79B include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
