Murray 6271270X85-18-2856-28 Snow Blower Thrower Parts
The Murray 6271270X85 - 18-2856-28 snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage snow thrower known for its reliability and affordability. Typically featuring a 26-inch to 28-inch clearing width, this model was a popular choice for homeowners tackling moderate to heavy snowfall on driveways and walkways. Its robust design and ease of use contributed to its widespread adoption during its production run.
The Murray 6271270X85 - 18-2856-28 snow blower was a workhorse designed for residential snow removal. While exact production years are difficult to pinpoint, it likely appeared in the late 1990s or early 2000s. It typically features a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 HP, depending on the specific sub-model. An electric start option was often available, making cold-weather starts easier. As a two-stage snow blower, it utilizes a robust auger system to break up the snow and an impeller to throw it further. Expect a clearing width between 26 and 28 inches, with an intake height around 20-21 inches. Throwing distance can reach up to 30-35 feet, depending on snow conditions. The drive system is wheel-driven, usually offering multiple forward speeds (typically 4-6) and reverse speeds (1-2) for maneuverability. Chute control is typically manual, requiring the operator to adjust the discharge direction. Headlights were a common feature, enhancing visibility during early morning or evening snow removal. Heated grips were not standard but may have been offered as an aftermarket accessory. This model is best suited for handling moderate to heavy snow accumulation on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Tecumseh / Briggs & Stratton 5-8 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 4-6 Forward / 1-2 Reverse |
| Fuel Tank | 1.5 gallons (estimated) |
| Weight | 200-250 lbs (estimated) |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break under excessive stress, protecting the auger gearbox. Always keep spare shear pins on hand and replace them as needed.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface to prevent damage to the snow blower and your driveway.
History & Background
The Murray 6271270X85 - 18-2856-28 was a popular model during its production run, likely introduced in the late 1990s. As a mass-produced, affordable two-stage snow blower, it offered a compelling value proposition for homeowners facing moderate snowfalls. While there weren't significant redesigns during its lifespan, minor updates to the engine or features may have occurred year-to-year.
Frequently Asked Questions
What engine is in the Murray 6271270X85 - 18-2856-28?
The Murray 6271270X85 - 18-2856-28 typically features a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 HP. Electric start was an available option on some models.
What is the clearing width of the 6271270X85 - 18-2856-28?
The clearing width of the Murray 6271270X85 - 18-2856-28 is typically between 26 and 28 inches, with an intake height of around 20-21 inches.
Is the 6271270X85 - 18-2856-28 a single-stage or two-stage snow blower?
The Murray 6271270X85 - 18-2856-28 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 6271270X85 - 18-2856-28?
Common wear parts for the Murray 6271270X85 - 18-2856-28 include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters.
