Murray 6271200X85-18-2830-28 Snow Blower Thrower Parts
The Murray 6271200X85 - 18-2830-28 snow blower, a popular choice for homeowners and property managers, offered reliable snow removal performance. While exact production years may vary, this gas-powered model was known for its efficient two-stage design, providing a clearing width suitable for medium to large driveways. Its robust construction and ease of use contributed to its widespread adoption for residential snow clearing tasks.
The Murray 6271200X85 - 18-2830-28 snow blower was a dependable machine designed for efficient snow removal. While precise manufacturing dates require further VIN research, it was a common model during its time. It typically features a gas-powered engine, often from Briggs & Stratton or Tecumseh, in the 5-8 HP range, depending on the specific variant. Electric start options were sometimes available. Being a two-stage snow blower, it uses an auger to break up the snow and then an impeller to throw it away from the cleared area. The auger system is designed to efficiently pull snow into the machine. It has a clearing width around 26-28 inches and an intake height of approximately 20-21 inches, allowing it to handle moderate snow depths. The throwing distance can reach up to 30-40 feet, depending on snow conditions. This model usually employs a wheel-drive system, with multiple forward speeds and reverse gears for enhanced maneuverability. The chute is typically manually controlled, allowing for directional adjustments. While a headlight and heated grips were not common on this specific model, its robust design made it suitable for handling moderate to heavy snowfalls on residential driveways and walkways. Its two-stage design allows it to handle a wider range of snow conditions compared to single-stage models.
Specifications
| Engine | Tecumseh 6 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Approx.) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage and wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and replace shear pins as needed. Shear pins protect the auger gearbox from damage if the auger encounters a hard object.
- Inspect belt tension regularly and adjust as needed. Worn or loose belts can reduce throwing distance and overall performance.
- Change the engine oil according to the manufacturer's recommendations. Using a fuel stabilizer during off-season storage can prevent fuel degradation and ensure easy starting next season. Adjust the skid shoes to ensure proper clearance and prevent damage to the scraper bar and ground surface.
History & Background
The Murray 6271200X85 - 18-2830-28 snow blower was a popular model produced during the late 1990s and early 2000s. While specific redesign information is limited, its robust two-stage design and reliable engine contributed to its popularity among homeowners. It offered a balance of performance and affordability in the snow blower market.
Frequently Asked Questions
What engine is in the Murray 6271200X85 - 18-2830-28?
The Murray 6271200X85 - 18-2830-28 typically uses a Tecumseh engine around 6 HP. Some models may have featured an optional electric start.
What is the clearing width of the 6271200X85 - 18-2830-28?
The Murray 6271200X85 - 18-2830-28 has a clearing width of 28 inches and an intake height of 21 inches.
Is the 6271200X85 - 18-2830-28 a single-stage or two-stage snow blower?
The Murray 6271200X85 - 18-2830-28 is a two-stage snow blower. It utilizes an auger to gather and break up the snow, and then an impeller throws the snow out through the chute.
What are common parts needed for the 6271200X85 - 18-2830-28?
Common replacement parts for the Murray 6271200X85 - 18-2830-28 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
