Murray 627108X31C Snow Blower Thrower Parts
The Murray 627108X31C is a gas-powered, two-stage snow thrower popular for its reliable performance and affordability. Often manufactured in the early to mid-2000s, this model features a generous clearing width, making it suitable for driveways and walkways. Its two-stage design allows it to handle moderate to heavy snowfall efficiently, and it was a favorite for homeowners looking for a balance of power and value.
The Murray 627108X31C snow blower was a staple in residential snow removal during its production years, offering a robust solution for homeowners facing typical winter conditions. While the exact years produced can vary slightly depending on the retailer and region, it was widely available in the early to mid-2000s. This model is powered by a Briggs & Stratton or Tecumseh engine, typically ranging from 5 to 6.5 HP. Some versions may have offered an optional electric start for added convenience in cold weather. The 627108X31C utilizes a two-stage system, where the auger breaks up the snow and feeds it into the impeller, which then throws the snow out of the chute. The auger is typically a serrated steel design for efficient snow intake. Its clearing width is approximately 26 inches, with an intake height of around 20 inches, allowing it to handle a decent amount of snow in a single pass. The throwing distance can reach up to 30-35 feet, depending on the snow conditions. This model typically features a wheel drive system with multiple forward and reverse speeds, offering good maneuverability. The chute rotation is usually manually controlled, allowing the operator to direct the snow stream. While a headlight and heated grips are not standard on this model, its straightforward design and reliable engine make it a solid choice for homeowners dealing with moderate snowfall on paved surfaces. Ideal for driveways, walkways, and patios.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6.5 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | ~1.5 gallons |
| Weight | ~180 lbs |
| Years Produced | Early to Mid 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear. Replace worn parts to maintain optimal performance.
- Check and replace shear pins as needed. These protect the auger gearbox from damage caused by hard objects.
- Ensure proper belt tension for the auger and drive systems. Loose belts can slip and reduce throwing distance.
- Change the engine oil annually or as recommended by the engine manufacturer. Use the correct oil type and viscosity.
- Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems.
- Adjust the skid shoes to prevent damage to the surface being cleared and ensure proper snow removal.
History & Background
The Murray 627108X31C snow blower was introduced as a mid-range model offering a balance of power and affordability for homeowners. While there were no major redesigns during its production run, some minor component updates may have occurred over the years. It became a popular choice for those needing a reliable two-stage snow blower without breaking the bank.
Frequently Asked Questions
What engine is in the Murray 627108X31C?
The Murray 627108X31C typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 6.5 horsepower. Some models may have an optional electric start feature.
What is the clearing width of the 627108X31C?
The Murray 627108X31C has a clearing width of approximately 26 inches and an intake height of around 20 inches.
Is the 627108X31C a single-stage or two-stage snow blower?
The Murray 627108X31C is a two-stage snow blower. It uses an auger to break up and collect the snow, then an impeller to throw the snow out of the chute.
What are common parts needed for the 627108X31C?
Common parts needed for the Murray 627108X31C include shear pins, auger belts, drive belts, auger paddles, a scraper bar, skid shoes, spark plugs, and fuel filters.
