Murray 627107X31A Snow Blower Thrower Parts
The Murray 627107X31A snow blower, likely manufactured in the early to mid 2000s, is a gas-powered, two-stage model known for its reliable performance in residential snow removal. Featuring a capable engine and a practical clearing width, it became a popular choice for homeowners seeking an effective and affordable solution for tackling moderate to heavy snowfall. This snow thrower helped families clear their driveways and walkways efficiently.
The Murray 627107X31A is a two-stage snow blower designed for residential and light commercial use. While precise production years are difficult to pinpoint without further research into specific serial numbers, it was likely available in the early to mid 2000s. It's typically powered by a Briggs & Stratton or Tecumseh engine, ranging from approximately 5 to 8 horsepower (check your specific model for HP/cc details). Many models featured an optional electric start for easier cold-weather starts. As a two-stage snow blower, the 627107X31A utilizes an auger to break up and gather snow, followed by an impeller that throws the snow through the discharge chute. The clearing width is typically around 26 inches, with an intake height of approximately 20 inches, allowing it to handle moderate snowfalls effectively. Throwing distance is usually up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds for maneuverability. Chute controls are usually manual, allowing the operator to direct the snow stream. Headlights may or may not be equipped on this model. This snow blower is best suited for paved or gravel driveways and walkways with moderate to heavy snow accumulations.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP (verify specific model) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Early to Mid 2000s (estimated) |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for damage, wear, and proper alignment. Replace worn or damaged parts promptly to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage if the auger encounters a hard object. Always use the correct replacement shear pins.
- Use fuel stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray 627107X31A was part of Murray's lineup of affordable and reliable snow blowers aimed at the residential market. While not a groundbreaking model, it offered a good balance of power, features, and price, making it a popular choice for homeowners. Specific redesigns or major updates are not widely documented, suggesting incremental improvements during its production run.
Frequently Asked Questions
What engine is in the Murray 627107X31A?
The Murray 627107X31A typically uses a Briggs & Stratton or Tecumseh engine in the 5-8 horsepower range. Electric start may have been an available option, so check your specific unit.
What is the clearing width of the 627107X31A?
The Murray 627107X31A has a clearing width of approximately 26 inches and an intake height of about 20 inches.
Is the 627107X31A a single-stage or two-stage snow blower?
The Murray 627107X31A is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller throws the snow out through the chute.
What are common parts needed for the 627107X31A?
Common replacement parts for the Murray 627107X31A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
