Murray 627104X30B Snow Blower Thrower Parts
The Murray 627104X30B is a robust gas-powered snow thrower designed for tackling moderate to heavy snowfall. Likely manufactured in the early 2000s, this two-stage model boasts a clearing width of 27 inches, making it a popular choice for homeowners and small business owners needing efficient snow removal from driveways and walkways. Its reliable performance and user-friendly design contributed to its widespread appeal.
The Murray 627104X30B snow thrower was a staple in the Murray lineup, providing a dependable solution for snow removal. While exact production years can vary, it was likely produced in the late 1990s and early 2000s. This model typically features a Briggs & Stratton engine, around 9-10 horsepower, offering sufficient power for most residential snow clearing tasks. An electric start option might have been available on some versions. The 627104X30B is a two-stage snow blower. This means it utilizes an auger to break up the snow and then an impeller to throw the snow away from the clearing path. It typically has a 27-inch clearing width and an intake height of approximately 20-21 inches, enabling it to handle deeper snowfalls. The throwing distance can reach up to 30-40 feet depending on the snow conditions. The drive system is wheel-driven, often with multiple forward and reverse speeds to provide maneuverability. Chute controls are usually manual, allowing users to adjust the direction of the snow discharge. Many models included a headlight for improved visibility during early morning or evening snow removal. While heated grips were not standard, they might have been added aftermarket by some owners. The Murray 627104X30B is best suited for moderate to heavy snow accumulations on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Briggs & Stratton 9-10 HP (Electric Start Option Available) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 27 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if they break. Shear pins protect the auger gearbox from damage if a hard object is encountered.
- Fuel System Maintenance: Use fuel stabilizer in the off-season to prevent fuel deterioration and carburetor problems. Drain the fuel tank and run the engine until it stalls before storing the snow blower for the summer.
- Oil Changes: Perform regular oil changes according to the manufacturer's recommendations to ensure optimal engine lubrication and performance.
History & Background
The Murray 627104X30B was introduced as a reliable and affordable option for homeowners seeking a two-stage snow blower. While specific redesigns are not widely documented, Murray consistently focused on providing dependable performance and ease of use. This model helped solidify Murray's reputation for providing value-oriented snow removal equipment.
Frequently Asked Questions
What engine is in the Murray 627104X30B?
The Murray 627104X30B typically uses a Briggs & Stratton engine, with horsepower ranging from 9 to 10 HP. An electric start option was often available.
What is the clearing width of the 627104X30B?
The Murray 627104X30B has a clearing width of 27 inches and an intake height of approximately 21 inches.
Is the 627104X30B a single-stage or two-stage snow blower?
The Murray 627104X30B is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to discharge it through the chute.
What are common parts needed for the 627104X30B?
Common replacement parts for the Murray 627104X30B include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
