Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 624808X4NA Snow Blower Thrower Parts

Replacement parts for the Murray 624808X4NA Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Murray 624808X4NA is a robust two-stage gas-powered snow thrower, primarily manufactured in the early to mid-2000s. Featuring a 24-inch clearing width, this model became popular for its reliable performance in handling moderate to heavy snowfall on residential driveways and walkways. It provided a good balance of power and maneuverability for homeowners needing a dependable snow removal solution.

About the 624808X4NA

The Murray 624808X4NA snow thrower was a popular choice during its production run in the early to mid-2000s. It's powered by a Briggs & Stratton engine, typically around 6.5 HP (approximately 205cc), offering sufficient power for most residential snow removal tasks. While electric start wasn't standard, some versions might have been available with this feature as an upgrade. As a two-stage snow thrower, it utilizes an auger to break up and collect snow, then an impeller to discharge it through the chute. The 24-inch clearing width allows for efficient snow removal, while the intake height of approximately 20 inches handles moderate drifts. It can throw snow up to 30 feet, depending on the snow conditions. The drive system features wheels and typically offers 6 forward speeds and 2 reverse speeds, providing good control and maneuverability. The chute rotation is manual, controlled by a crank. While not equipped with a headlight or heated grips, the 624808X4NA is well-suited for homeowners dealing with moderate to heavy snowfall on paved surfaces. It's a reliable choice for driveways, walkways, and patios where consistent snow removal is essential.

624808X4NA Specifications

EngineBriggs & Stratton 6.5 HP (205cc) No
Stage TypeTwo-Stage
Clearing Width24 inches
Intake Height20 inches
Throwing DistanceUp to 30 ft
Drive SystemWheel - 6 Forward/2 Reverse
Fuel TankUnknown gallons
WeightUnknown lbs
Years ProducedEarly to Mid 2000s

624808X4NA Maintenance Tips

  • Inspect the auger and impeller regularly for damage or wear. Replace worn paddles or repair any bent auger blades to maintain optimal performance.
  • Always use the correct shear pins for the auger. Using incorrect or stronger bolts can damage the gearbox. Replace shear pins immediately after breakage.
  • Check the belt tension annually. Loose belts can cause slippage and reduced performance. Adjust or replace belts as needed.
  • Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues. Consider draining the fuel tank completely for long-term storage.

624808X4NA History & Background

The Murray 624808X4NA was introduced as a mid-range, two-stage snow thrower for homeowners. While there were no major redesigns during its production, minor improvements might have been implemented. Its significance lies in providing a cost-effective and reliable snow removal solution during its time on the market.

Frequently Asked Questions

Which motion drive belt fits the Murray 624808X4NA?

The recommended motion drive belt for the Murray 624808X4NA is 579932 - Belt, Motion Drive. This part is a direct replacement for optimal performance.

Which auger drive belt is recommended for the Murray 624808X4NA?

For the Murray 624808X4NA, the correct auger drive belt is 585416 - Belt, Bracket Auger Drive. This belt ensures proper auger operation.

What are the primary drive belts for the Murray 624808X4NA?

The primary drive belts include the motion drive belt (579932 - Belt, Motion Drive) and the auger drive belt (585416 - Belt, Bracket Auger Drive).

What replacement drive belts are available for the Murray 624808X4NA?

Common replacement belts include the motion drive belt (579932 - Belt, Motion Drive) and the auger drive belt (585416 - Belt, Bracket Auger Drive).

Showing 1-2 of 2 products