Murray 624808X4F Snow Blower Thrower Parts
The Murray 624808X4F is a robust two-stage gas-powered snow thrower, designed for residential and light commercial use. Likely manufactured in the late 1990s and early 2000s, this model features a 24-inch clearing width, making it a popular choice for homeowners needing to clear moderate to heavy snowfall from driveways and walkways. Its reliable engine and two-stage design provide efficient snow removal in various winter conditions.
The Murray 624808X4F snow thrower was a dependable model popular for its balance of power and maneuverability. While exact production years are difficult to pinpoint, it's believed to have been produced in the late 1990s and early 2000s. It typically features a Briggs & Stratton or Tecumseh engine in the 5-6 horsepower range, providing ample power for tackling typical snowfall. An electric start option was often available, adding convenience in cold weather. This is a two-stage snow thrower, meaning it utilizes an auger to break up the snow and then an impeller to throw it away from the machine. The auger system is designed to chop through snow and ice, while the impeller efficiently discharges it. The 624808X4F boasts a 24-inch clearing width and an intake height of around 20 inches, allowing it to handle significant snow accumulations. Throwing distance can reach up to 30 feet, depending on the snow conditions. The drive system typically features wheels with multiple forward and reverse speeds, providing good traction and control. Chute controls are usually manual, allowing the operator to adjust the direction of the snow stream. While it may not have had features like a headlight or heated grips, its reliable performance and straightforward design made it a favorite for clearing driveways, sidewalks, and other residential areas in moderate to heavy snow conditions.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 180 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace them immediately if the auger stops suddenly, indicating a potential obstruction. Using incorrect shear pins can damage the gearbox.
- Fuel System Care: Use fresh fuel and add a fuel stabilizer, especially when storing the snow blower for the off-season. This prevents fuel degradation and carburetor issues.
History & Background
The Murray 624808X4F was introduced as a mid-range snow thrower designed for homeowners seeking a balance of power and affordability. It offered a dependable solution for clearing snow from driveways and walkways, contributing to Murray's reputation for producing reliable outdoor power equipment. This model was part of a broader line of snow removal equipment from Murray.
Frequently Asked Questions
What engine is in the Murray 624808X4F?
The Murray 624808X4F typically uses a Briggs & Stratton or Tecumseh engine in the 5-6 horsepower range. Some models may have included an electric start option.
What is the clearing width of the 624808X4F?
The Murray 624808X4F has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 624808X4F a single-stage or two-stage snow blower?
The Murray 624808X4F is a two-stage snow blower. It utilizes an auger to break up and collect the snow and then an impeller to throw it out of the chute.
What are common parts needed for the 624808X4F?
Common parts needed for the Murray 624808X4F include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
