Murray 624808X31E Snow Blower Thrower Parts
The Murray 624808X31E is a gas-powered, two-stage snow thrower manufactured in the early 2000s designed for both residential and light commercial use. Featuring a 24-inch clearing width, this model became a popular choice for homeowners needing reliable snow removal in moderate to heavy snowfall conditions. Its robust construction and user-friendly design made it a dependable solution for clearing driveways and walkways.
The Murray 624808X31E snow blower was produced in the early 2000s, offering a balance of power and maneuverability for homeowners. It's typically equipped with a Briggs & Stratton engine, ranging from 5.5 to 6.5 HP, with some models offering an electric start option for easy starting in cold weather. Being a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw the snow away from the cleared area. The 624808X31E provides a 24-inch clearing width and an intake height around 20 inches, allowing it to handle a decent amount of snowfall. The throwing distance is typically up to 30 feet, depending on the snow conditions. This model features a wheel drive system with multiple forward and reverse speeds, offering good traction and control. The chute rotation is manual, allowing users to direct the snow stream. While it lacks features like a headlight or heated grips, its simplicity and dependability have made it a popular choice for tackling moderate snowfall on driveways, walkways, and smaller commercial properties. The 624808X31E excels in dry, powdery snow and can handle heavier, wet snow with slightly reduced throwing distance.
Specifications
| Engine | Briggs & Stratton 5.5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 170 lbs |
| Years Produced | Early 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage: Look for bent or broken paddles and auger blades, and replace them promptly to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage. Keep extra shear pins on hand and replace them immediately if they break.
- Check and adjust belt tension: Loose belts can cause slippage and reduce throwing distance. Consult your owner's manual for proper belt tensioning procedures.
- Use fuel stabilizer during off-season storage: Prevent fuel degradation by adding a fuel stabilizer to the gas tank before storing the snow blower for the summer. This will help ensure easy starting next winter.
History & Background
The Murray 624808X31E was introduced as a mid-range, two-stage snow blower aimed at homeowners needing more power than a single-stage but less than a commercial-grade machine. It represented Murray's commitment to providing affordable and reliable snow removal solutions. While not revolutionary, it established itself as a dependable option in the residential snow blower market.
Frequently Asked Questions
What engine is in the Murray 624808X31E?
The Murray 624808X31E is typically powered by a Briggs & Stratton engine, ranging from 5.5 to 6.5 horsepower. Some models were available with an electric start option.
What is the clearing width of the 624808X31E?
The Murray 624808X31E has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 624808X31E a single-stage or two-stage snow blower?
The Murray 624808X31E is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow out of the discharge chute. This two-stage design allows it to handle larger snowfalls and throw the snow further than a single-stage model.
What are common parts needed for the 624808X31E?
Common replacement parts for the Murray 624808X31E include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and timely replacement of these parts will keep your snow blower running smoothly.
