Murray 624808X31D Snow Blower Thrower Parts
The Murray 624808X31D is a gas-powered, two-stage snow blower, likely manufactured in the early 2000s. Featuring a 24-inch clearing width, this model offered a balance of power and maneuverability for residential snow removal. Its popularity stemmed from its reliable performance and ease of use, making it a common choice for homeowners dealing with moderate snowfall.
The Murray 624808X31D snow thrower was a popular model designed for residential snow removal. Production years likely fell within the late 1990s and early 2000s. While exact engine specifications may vary slightly depending on the specific year of manufacture, it generally featured a gas-powered engine, often a Briggs & Stratton or Tecumseh, with a horsepower rating between 5 and 8 HP. Electric start was a common option on these models. As a two-stage snow blower, the 624808X31D employs an auger to break up snow and feed it into a high-speed impeller, which then throws the snow out of the chute. The clearing width is 24 inches, and the intake height is around 20 inches. Expect a throwing distance of up to 30 feet, depending on snow conditions. It uses a wheel-drive system, typically offering multiple forward speeds and a reverse gear. Chute control is generally manual, allowing the operator to adjust the direction of the snow stream. Some models included a headlight for enhanced visibility during early morning or evening snow removal. These machines are well-suited for handling moderate snowfall on driveways and walkways, offering a good balance of power and ease of handling for homeowners.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 150-200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow-throwing performance.
- Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage if a hard object is ingested. Keep extra shear pins on hand and replace them immediately if broken.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height based on your surface (pavement, gravel, etc.) to prevent damage to both the snow blower and the surface you are clearing.
History & Background
The Murray 624808X31D was a common sight in the residential snow blower market during its production run. It represented a standard configuration for two-stage snow blowers of the era, offering a balance of performance and affordability. While no major redesigns are known, minor component updates may have occurred during its production years.
Frequently Asked Questions
What engine is in the Murray 624808X31D?
The Murray 624808X31D typically features a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower. An electric start was often available as an option.
What is the clearing width of the 624808X31D?
The Murray 624808X31D has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 624808X31D a single-stage or two-stage snow blower?
The Murray 624808X31D is a two-stage snow blower. It uses an auger to gather and break up snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 624808X31D?
Common replacement parts for the Murray 624808X31D include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
