Murray 624555X61A Snow Blower Thrower Parts
Replacement parts for the Murray 624555X61A Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Murray 624555X61A is a gas-powered, two-stage snow blower designed for both residential and light commercial use, offering a robust solution for snow removal. Featuring a clearing width of 24 inches, this model, popular for its blend of power and maneuverability, was likely manufactured in the late 1990s and early 2000s. Its efficient two-stage design made it a dependable choice for homeowners and professionals alike.
About the 624555X61A
The Murray 624555X61A snow blower was a popular choice during its production run, likely spanning the late 1990s and early 2000s. Specific engine details are crucial for maintenance and parts replacement. While precise engine specifications may vary, it typically featured a Briggs & Stratton or Tecumseh gas engine, delivering around 5-6 horsepower. Electric start functionality may have been an optional feature on some versions. This model employs a two-stage auger system, using a robust auger to break up snow and ice, followed by an impeller to discharge it through the chute. The clearing width of 24 inches allows for efficient snow removal, while the intake height accommodates moderate snow depths. Expect a throwing distance of up to 30 feet, depending on snow conditions. This snow blower utilizes a wheel drive system with multiple forward and reverse speeds, providing good maneuverability. Chute controls are typically manual, allowing users to adjust the direction and deflection of the snow stream. A headlight is a common feature for increased visibility during early morning or evening snow removal. While heated grips are not standard on this model, the gloves used by the operator usually provide adequate warmth. The 624555X61A is ideally suited for removing snow from driveways, sidewalks, and small parking areas in areas with moderate to heavy snowfall.
624555X61A Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 150 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
624555X61A Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger from damage if it encounters a solid object. Always keep spare shear pins on hand and replace them immediately if they break.
- Use Fuel Stabilizer: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel from degrading and causing starting problems in the future.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface type (pavement, gravel). This prevents damage to the snow blower and the surface you're clearing.
624555X61A History & Background
The Murray 624555X61A was a solid snow blower offering from Murray, likely introduced in the late 1990s. It was a reliable model in its time, offering a good balance of power and ease of use for residential snow removal. While there aren't records of major redesigns during its production, minor improvements may have been implemented over the years.
Frequently Asked Questions
Which motion drive belt fits the Murray 624555X61A?
The recommended motion drive belt for the Murray 624555X61A is 579932 - Belt, Motion Drive.
How often should the motion drive belt be replaced on the Murray 624555X61A?
It is recommended to inspect the motion drive belt annually and replace it if it shows signs of wear, cracking, or stretching. The appropriate replacement is 579932 - Belt, Motion Drive.
What are the common symptoms of a worn motion drive belt on the Murray 624555X61A?
Signs of a worn motion drive belt can include slippage, loss of propulsion, or visible cracks and fraying. For reliable operation, replace it with 579932 - Belt, Motion Drive.
Which drive belt is most commonly replaced on the Murray 624555X61A?
A frequently needed wear part for the Murray 624555X61A is the motion drive belt. The appropriate replacement is 579932 - Belt, Motion Drive.









