Murray 624505X54C Snow Blower Thrower Parts
The Murray 624505X54C is a gas-powered, two-stage snow thrower popular for its balance of power and ease of use, typically manufactured in the early to mid-2000s. Featuring a 24-inch clearing width, this model is well-suited for residential driveways and walkways. Its reliable engine and two-stage design made it a favorite for tackling moderate to heavy snowfall.
The Murray 624505X54C snow thrower was a popular model designed for residential snow removal. While exact production years are difficult to pinpoint, it was most likely available in the early to mid 2000's. It's powered by a Briggs & Stratton or Tecumseh engine, typically around 5-6 HP. Some models featured an optional electric start for easier starting in cold weather. This is a two-stage snow blower, utilizing an auger to break up snow and an impeller to throw it away from the clearing path. The auger is protected by shear pins that are designed to break if a hard object is encountered, preventing damage to the auger and gearbox. The 624505X54C boasts a 24-inch clearing width and an intake height of around 20 inches, allowing it to handle moderate snow depths. The throwing distance is typically up to 30 feet, depending on snow conditions. It uses a wheel drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute rotation is manually controlled, allowing the operator to direct the snow stream. Some models included a headlight for improved visibility in low-light conditions. This snow thrower is ideal for homeowners dealing with moderate to heavy snowfall on driveways, sidewalks, and patios. Its two-stage design allows it to handle packed snow and icy conditions more effectively than single-stage models.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 150 lbs |
| Years Produced | Early to Mid 2000's |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged components to ensure optimal performance.
- Replace Shear Pins: Always keep spare shear pins on hand. Replace them immediately after they break to prevent damage to the auger gearbox.
- Stabilize Fuel for Storage: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Periodically adjust the skid shoes to maintain the correct clearing height and prevent damage to the scraper bar and auger housing. This is especially important when operating on gravel driveways.
History & Background
The Murray 624505X54C was a popular two-stage snow blower model that provided homeowners with a reliable solution for winter snow removal. It was part of Murray's broader line of outdoor power equipment. The model likely saw few significant design changes during its production run, focusing on maintaining a dependable and affordable option for residential use.
Frequently Asked Questions
What engine is in the Murray 624505X54C?
The Murray 624505X54C typically used a Briggs & Stratton or Tecumseh engine, around 5-6 HP. Some models were equipped with an electric start feature for easier starting in cold weather.
What is the clearing width of the 624505X54C?
The Murray 624505X54C has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 624505X54C a single-stage or two-stage snow blower?
The Murray 624505X54C is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to forcefully throw the snow away from the cleared area. This design is more effective for handling heavier and wetter snow compared to single-stage models.
What are common parts needed for the 624505X54C?
Common parts needed for the Murray 624505X54C include shear pins (auger and impeller), drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and oil filters (if applicable).
