Murray 624504X43A Snow Blower Thrower Parts
The Murray 624504X43A is a gas-powered, two-stage snow blower designed for efficient residential and commercial snow removal. This model, produced throughout the 2000s, features a 24-inch clearing width, making it a popular choice for homeowners and property managers needing to clear driveways and walkways quickly. Its robust two-stage design allowed it to handle deeper snowfalls than single-stage models.
The Murray 624504X43A snow blower was a reliable and widely used model, particularly during the early to mid-2000s. It was powered by a Briggs & Stratton engine, typically a 6.5 HP engine, known for its durability and cold-weather starting capabilities. Some models featured an optional electric start for added convenience. Being a two-stage snow blower, it utilized an auger system to break up the snow and then an impeller to throw it away from the clearing path. This machine boasts a 24-inch clearing width and an intake height of around 20 inches, allowing it to tackle moderate to heavy snowfalls. The throwing distance could reach up to 30 feet, depending on snow conditions. The drive system on the 624504X43A is wheel-driven, typically with 6 forward speeds and 2 reverse speeds, providing good maneuverability. Chute control is usually manual, allowing the operator to adjust the direction and angle of the snow stream. Many models also included a headlight for improved visibility during early morning or evening snow removal. While not equipped with heated grips, its reliable performance and ease of use made it a popular choice for handling typical residential snow removal tasks. It excels in paved driveways and walkways, efficiently clearing moderate to deep snow accumulations.
Specifications
| Engine | Briggs & Stratton 6.5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Early to Mid 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage: Check for cracks, bends, or excessive wear on the auger blades and impeller fins to ensure optimal snow throwing performance.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage. Always use the correct replacement shear pins and keep spares on hand.
- Check and adjust belt tension: Proper belt tension is crucial for efficient power transfer to the auger and impeller. Refer to the owner's manual for instructions on adjusting belt tension.
- Use fuel stabilizer during off-season storage: Prevent fuel degradation by adding a fuel stabilizer to the gas tank before storing the snow blower for the summer. This will help ensure easy starting next season.
History & Background
The Murray 624504X43A was introduced as a mid-range two-stage snow blower designed for homeowners. While specific redesigns weren't prevalent, slight component variations may have occurred over the years. It represented a popular and dependable option in the residential snow removal market during its production run.
Frequently Asked Questions
What engine is in the Murray 624504X43A?
The Murray 624504X43A is typically equipped with a 6.5 HP Briggs & Stratton engine. Some models may have had an optional electric start feature.
What is the clearing width of the 624504X43A?
The Murray 624504X43A has a clearing width of 24 inches and an intake height of 20 inches.
Is the 624504X43A a single-stage or two-stage snow blower?
The Murray 624504X43A is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to discharge it through the chute.
What are common parts needed for the 624504X43A?
Common parts needed for the Murray 624504X43A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. These parts are subject to wear and tear and may need periodic replacement.
