{"heroContent":"The Murray 622518X31D is a gas-powered, two-stage snow thrower known for its reliability and ease of use. Typically manufactured in the late 2000s and early 2010s, this model boasts a 25-inch clearing width making it suitable for medium to large-sized driveways and walkways. Its combination of power and affordability made it a popular choice for homeowners needing efficient snow removal.","heroImage":null,"expandedContent":"The Murray 622518X31D snow thrower was a popular model produced by Murray, a well-known brand in outdoor power equipment. Specific production years are generally between 2008 and 2012 but may vary depending on retailer inventories. This model is equipped with a Briggs & Stratton engine, typically a 250cc engine, providing ample power for tackling moderate to heavy snowfall. It is a two-stage snow thrower, meaning it utilizes an auger to break up the snow and an impeller to throw it away from the clearing path.\n\nThe auger system is designed to efficiently pull snow into the housing, while the high-speed impeller propels it through the discharge chute. The 622518X31D offers a clearing width of 25 inches and an intake height of approximately 20 inches, allowing it to handle substantial snow depths. Throwing distance is usually up to 30-40 feet, depending on snow conditions. The machine features a wheel drive system with multiple forward and reverse speeds, providing good maneuverability. The chute rotation is manually controlled, allowing the user to direct the snow discharge. While this model generally lacks features like headlights or heated grips, its robust construction and reliable performance make it suitable for residential snow removal in areas with moderate to heavy snowfall.","specifications":"

Engine	Briggs & Stratton 250cc, Electric Start Optional
Stage Type	Two-Stage
Clearing Width	25 inches
Intake Height	20 inches
Throwing Distance	Up to 40 ft
Drive System	Wheel - 6 Forward/2 Reverse
Fuel Tank	Unknown gallons
Weight	Approx 200 lbs
Years Produced	2008-2012 (estimated)

","history":"The Murray 622518X31D snow thrower was introduced as a mid-range model in Murray's snow removal lineup. It was designed to offer a balance of power, clearing capacity, and affordability for homeowners. While it did not undergo major redesigns during its production run, it remains a respected snow removal tool for its straightforward design and reliable performance.","maintenanceTips":"

Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any worn or damaged parts to maintain optimal snow throwing performance.
Replace Shear Pins: Always have spare shear pins on hand. Replace them immediately if the auger stops abruptly, as they are designed to break to protect the gearbox from damage.
Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
Adjust Skid Shoes: Adjust the skid shoes based on the surface you're clearing (pavement vs. gravel) to prevent damage to the machine and the surface below.

","faqItems":[{"question":"What engine is in the Murray 622518X31D?","answer":"The Murray 622518X31D typically uses a Briggs & Stratton 250cc engine. Some models may have offered an optional electric start."},{"question":"What is the clearing width of the 622518X31D?","answer":"The Murray 622518X31D has a clearing width of 25 inches and an intake height of 20 inches."},{"question":"Is the 622518X31D a single-stage or two-stage snow blower?","answer":"The Murray 622518X31D is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow through the chute."},{"question":"What are common parts needed for the 622518X31D?","answer":"Commonly needed parts for the Murray 622518X31D include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters."}]}

622518x31d

579932 - Belt, Motion Drive