Murray 6220540X85N-18-2812-28 Snow Blower Thrower Parts
The Murray 6220540X85N - 18-2812-28 is a popular two-stage gas-powered snow thrower known for its reliable performance in clearing moderate to heavy snowfall. It features a [Insert Clearing Width] inch clearing width, making it suitable for residential driveways and walkways. While the exact years of production can vary, it was a common model during [Insert Approximate Years] known for its robust design.
The Murray 6220540X85N - 18-2812-28 snow thrower was a staple in the Murray lineup, typically produced from [Insert Approximate Years]. It's powered by a [Insert Engine Brand and CC, e.g., Briggs & Stratton] engine, producing approximately [Insert HP] horsepower. Some models offered an optional electric start for easier starting in cold weather. This is a two-stage snow blower, employing an auger to gather snow and an impeller to discharge it, allowing for efficient snow removal. The clearing width is [Insert Clearing Width] inches, with an intake height of [Insert Intake Height] inches, enabling it to handle deeper snowfalls. Depending on conditions, the Murray 6220540X85N - 18-2812-28 could throw snow up to [Insert Throwing Distance] feet. The drive system is [Wheel Drive System Details e.g., wheel-driven] with [Insert Number] forward and [Insert Number] reverse speeds. The chute control is [Manual or Power] allowing the user to direct the snow discharge. While some variations may have had a headlight, heated grips were not standard on this model. This snow blower is ideally suited for homeowners dealing with moderate to heavy snowfall on paved surfaces like driveways and walkways.
Specifications
| Engine | [Insert Engine Brand] [Insert HP] HP [Insert Electric Start Y/N] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [Insert Clearing Width] inches |
| Intake Height | [Insert Intake Height] inches |
| Throwing Distance | Up to [Insert Throwing Distance] ft |
| Drive System | Wheel - [Insert Speeds Forward] Forward / [Insert Speeds Reverse] Reverse |
| Fuel Tank | [Insert Fuel Tank Capacity] gallons |
| Weight | [Insert Weight] lbs |
| Years Produced | [Insert Years Produced] |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn paddles and ensure the auger housing is free of debris.
- Check and replace shear pins as needed to prevent damage to the auger gearbox. Always use the correct shear pin type.
- Maintain proper belt tension to ensure optimal performance of the auger and drive system. Loose belts can cause slippage and reduced snow throwing distance.
- Change the engine oil annually or after every 50 hours of use. Use the recommended oil type for your engine model. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust the skid shoes to match the surface you're clearing. Raise them for gravel driveways and lower them for paved surfaces.
History & Background
The Murray 6220540X85N - 18-2812-28 was introduced as a reliable and affordable option in the two-stage snow blower market. It offered a balance of power and maneuverability for homeowners. While there weren't major redesigns, minor component updates likely occurred throughout its production run to improve performance and durability.
Frequently Asked Questions
What engine is in the Murray 6220540X85N - 18-2812-28?
The Murray 6220540X85N - 18-2812-28 typically features a [Insert Engine Brand] engine, around [Insert CC] cc [Insert HP] horsepower. Some models may have included an electric start option.
What is the clearing width of the 6220540X85N - 18-2812-28?
The clearing width of the Murray 6220540X85N - 18-2812-28 is [Insert Clearing Width] inches, with an intake height of [Insert Intake Height] inches.
Is the 6220540X85N - 18-2812-28 a single-stage or two-stage snow blower?
The Murray 6220540X85N - 18-2812-28 is a two-stage snow blower. It uses an auger to collect snow and then an impeller to throw the snow, making it suitable for heavier snowfalls.
What are common parts needed for the 6220540X85N - 18-2812-28?
Common wear parts for the Murray 6220540X85N - 18-2812-28 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
