Murray 6220530X110N-18-2811-88 Snow Blower Thrower Parts
The Murray 6220530X110N - 18-2811-88 snow thrower was a popular gas-powered, two-stage model known for its reliable performance in moderate snow conditions. Featuring a specific clearing width, it offered a practical solution for homeowners seeking efficient snow removal. Its robust design and ease of use contributed to its popularity during its years of manufacture.
The Murray 6220530X110N - 18-2811-88 snow thrower is a gas-powered, two-stage model designed for residential and light commercial snow removal. While exact engine specifications may vary depending on the year of manufacture, these machines typically utilized a Briggs & Stratton or Tecumseh engine, generally in the 5-8 HP range. Some models offered an optional electric start for easier cold-weather starts. As a two-stage unit, the Murray 6220530X110N features an auger that breaks up the snow and an impeller that throws the snow through the discharge chute. The clearing width is in the 20-22 inch range with an intake height of approximately 16-20 inches. Throwing distance could reach up to 30 feet depending on snow conditions. The drive system usually employs a wheel drive with multiple forward and reverse speeds, offering good maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. Many models included a headlight for improved visibility in low-light conditions. While heated grips were not a standard feature, the Murray 6220530X110N was well-suited for handling moderate snowfalls on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP (Electric Start Option) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 20-22 inches |
| Intake Height | 16-20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | ~1.5 gallons |
| Weight | ~150 lbs |
| Years Produced | (Specific years vary - Check Model Number) |
Maintenance Tips
- Regularly inspect the auger and impeller for wear or damage. Replace any worn or damaged parts promptly.
- Check the shear pins on the auger frequently and replace them if they are broken. Using the correct shear pins is crucial to prevent damage to the auger and gearbox.
- Ensure proper belt tension for optimal performance. Loose belts can cause slippage and reduce throwing distance. Check and adjust belt tension as needed.
- Change the engine oil according to the manufacturer's recommendations. Using fuel stabilizer during off-season storage will prevent fuel degradation and starting issues. Adjust skid shoes to avoid scraping the surface.
History & Background
The Murray 6220530X110N - 18-2811-88 snow thrower was a staple in many homes during its production years. While specific details on introduction and redesigns require confirming production dates, it represents a dependable class of snow removal equipment. It played a significant role in helping homeowners manage winter weather and maintain their properties.
Frequently Asked Questions
What engine is in the Murray 6220530X110N - 18-2811-88?
The Murray 6220530X110N - 18-2811-88 typically used a Briggs & Stratton or Tecumseh engine in the 5-8 HP range. Some models offered an electric start option for easier starting in cold weather.
What is the clearing width of the 6220530X110N - 18-2811-88?
The clearing width of the Murray 6220530X110N - 18-2811-88 is generally between 20 and 22 inches, with an intake height of approximately 16-20 inches.
Is the 6220530X110N - 18-2811-88 a single-stage or two-stage snow blower?
The Murray 6220530X110N - 18-2811-88 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 6220530X110N - 18-2811-88?
Common parts needed for the Murray 6220530X110N - 18-2811-88 include shear pins, belts, auger paddles (if equipped), a scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance.
