Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 621453X31A Snow Blower Thrower Parts

Find parts for your Murray 621453X31A Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.

The Murray 621453X31A is a robust gas-powered snow thrower popular with homeowners for its reliability and ease of use. Featuring a 21-inch clearing width and a single-stage design, this model was manufactured to efficiently clear snow from driveways and walkways. This model offers a convenient and affordable solution for residential snow removal needs.

About the 621453X31A

The Murray 621453X31A snow thrower is a single-stage machine designed for efficient snow removal from paved surfaces. While specific production years are difficult to pinpoint without access to a comprehensive Murray archive, similar models were popular throughout the late 1990s and early 2000s. Typically, this model features a gas-powered engine, often a Briggs & Stratton or Tecumseh, in the range of 4-5 horsepower (around 120-150cc). Electric start may have been available on some versions. As a single-stage snow thrower, it utilizes a rotating auger to collect snow and discharge it through the chute. The auger makes direct contact with the ground, propelling the machine forward. It has a clearing width of 21 inches and an intake height suitable for lighter snowfalls, usually around 8-12 inches. Throwing distances can vary up to 20-25 feet, depending on snow conditions. Being a single-stage, it's typically wheel-driven by the auger's rotation. The chute is manually controlled. While features like headlights and heated grips aren't common on basic single-stage models like the 621453X31A, its simplicity makes it a good choice for areas with relatively flat surfaces and moderate snowfall.

621453X31A Specifications

EngineBriggs & Stratton 4 HP, No Electric Start
Stage TypeSingle-Stage
Clearing Width21 inches
Intake Height8 inches
Throwing DistanceUp to 20 ft
Drive SystemWheel - Self Propelled
Fuel Tank1.5 gallons
WeightApproximately 80 lbs
Years ProducedLate 1990s - Early 2000s

621453X31A Maintenance Tips

  • Inspect the auger paddles frequently: Look for wear and tear, cracks, or damage. Replace worn paddles to maintain optimal snow clearing performance.
  • Check and replace shear pins: Shear pins protect the engine and auger from damage if the auger hits a hard object. Keep spare shear pins on hand.
  • Use fuel stabilizer: Add fuel stabilizer to the gas tank before storing the snow thrower for the off-season to prevent fuel degradation and carburetor issues.

621453X31A History & Background

The Murray 621453X31A snow thrower was part of Murray's line of affordable and dependable snow removal equipment designed for residential use. While specific details on its introduction are limited, it was a popular model in its time, known for its simple design and ease of operation. As a typical single-stage snow thrower, it likely did not receive major redesigns during its production run.

Frequently Asked Questions

Which auger belt fits the Murray 621453X31A?

The 760928 - Belt, Auger is the correct replacement belt designed for the Murray 621453X31A snow thrower.

When should the auger belt for the Murray 621453X31A be replaced?

The auger belt, such as the 760928 - Belt, Auger, should be replaced if it shows signs of wear, cracking, or if the auger performance is diminished.

What type of auger belt is used on the Murray 621453X31A?

The Murray 621453X31A uses a V-belt for its auger drive system. The 760928 - Belt, Auger is designed to meet these specifications.

What are the most common wear parts for the Murray 621453X31A?

A key wear item that often requires replacement on the Murray 621453X31A is the auger belt. The 760928 - Belt, Auger is a durable replacement option.

Showing 1-1 of 1 products