Murray 621451X31C Snow Blower Thrower Parts
Find parts for your Murray 621451X31C Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Murray 621451X31C is a gas-powered, two-stage snow blower known for its reliability and efficient snow removal capabilities. Typically manufactured in the early 2000s, this model features a 21-inch clearing width, making it a popular choice for homeowners dealing with moderate snowfall on driveways and walkways. Its user-friendly design and robust construction contributed to its widespread adoption for residential snow clearing tasks.
About the 621451X31C
The Murray 621451X31C snow blower was a popular model in the Murray lineup, offering a balance of power and maneuverability. Production years typically fall within the early 2000s. This machine is equipped with a Briggs & Stratton engine, typically around 5.5 HP. While electric start options were not standard, some models may have been retrofitted. As a two-stage snow blower, it utilizes an auger system to break up the snow and an impeller to throw it. The 621451X31C boasts a 21-inch clearing width and an intake height of approximately 12-13 inches, allowing it to handle moderate snowfalls effectively. Throwing distance can reach up to 20-25 feet depending on snow conditions. The drive system is wheel-driven, typically with multiple forward speeds (4-6) and reverse speeds (1-2). Chute control is usually manual, requiring the operator to adjust the direction and deflection. While a headlight and heated grips are not standard features on this model, its straightforward design and reliable performance make it well-suited for homeowners facing typical residential snow removal needs, especially on paved surfaces. Ideal snow conditions for this model are moderate snow depths (6-12 inches) on driveways and sidewalks.
621451X31C Specifications
| Engine | Briggs & Stratton 5.5 HP No Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 12 inches |
| Throwing Distance | Up to 25 ft |
| Drive System | Wheel - 4 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 150 lbs |
| Years Produced | Early 2000s |
621451X31C Maintenance Tips
- Inspect the auger and impeller regularly for any signs of damage or wear. Replace worn paddles or auger blades promptly to maintain optimal performance.
- Always use the correct shear pins and replace them immediately if broken. Using incorrect shear pins can cause severe damage to the auger and gearbox.
- Check the belt tension regularly and adjust as needed. Loose belts can slip, reducing the machine's snow throwing power.
- Use fuel stabilizer in the gasoline during the off-season to prevent fuel degradation and carburetor issues. Change the oil at the end of each season.
621451X31C History & Background
The Murray 621451X31C snow blower was introduced as a dependable option for homeowners seeking a mid-sized, two-stage machine. While it didn't undergo significant redesigns during its production run, it remained a popular choice due to its simple operation and effective snow clearing performance, contributing to Murray's reputation for affordable and reliable snow removal equipment.
Frequently Asked Questions
Which auger belt fits the Murray 621451X31C snow blower?
The correct replacement auger belt for the Murray 621451X31C is 760928 - Belt, Auger. This belt ensures proper operation of the auger mechanism.
When should I replace the auger belt on my Murray 621451X31C?
The auger belt should be replaced if it shows signs of wear, cracking, or if the auger is not engaging properly. A worn belt can slip, reducing the snow blower's efficiency. The correct replacement is 760928 - Belt, Auger.
How do I ensure the correct tension for the auger belt on a Murray 621451X31C?
Proper auger belt tension is crucial for efficient snow removal. Refer to your owner's manual for specific adjustment procedures. If a replacement is needed, consider the 760928 - Belt, Auger.
What are the most commonly needed replacement parts for the Murray 621451X31C?
For the Murray 621451X31C, a frequently replaced part is the auger belt, which is essential for the snow blower's operation. The correct replacement is 760928 - Belt, Auger.









