Murray 621451X0NA Snow Blower Thrower Parts
The Murray 621451X0NA is a gas-powered, two-stage snow thrower designed for both residential and light commercial use, manufactured primarily in the early to mid-2000s. Featuring a 21-inch clearing width, this model gained popularity due to its combination of affordability, ease of use, and ability to handle moderate snowfalls. Its robust design made it a reliable choice for homeowners needing a dependable snow removal solution.
The Murray 621451X0NA snow blower was a popular model produced by Murray for several years in the early to mid-2000s, offering a balance of performance and value. It's typically powered by a Briggs & Stratton engine, usually around 5-6 horsepower, providing sufficient power for typical snowfall. While electric start might have been available on some variations, the standard model often featured a recoil start. As a two-stage snow thrower, it uses an auger to break up the snow and then an impeller to throw it away from the clearing path. The 621451X0NA has a 21-inch clearing width and an intake height of approximately 12-13 inches, allowing it to handle moderate snow depths. Expect a throwing distance of up to 20-25 feet, depending on snow conditions. The drive system is typically wheel-driven, with multiple forward speeds and reverse. The chute control is usually manual, requiring the operator to physically adjust the direction. This model did not typically feature a headlight or heated grips. Ideal for homeowners and property managers dealing with moderate snowfall on driveways and walkways, the Murray 621451X0NA offers a practical and efficient snow removal solution.
Specifications
| Engine | Briggs & Stratton 5-6 HP Recoil Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 12-13 inches |
| Throwing Distance | Up to 25 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 0.8 gallons |
| Weight | Approximately 150 lbs |
| Years Produced | Early to Mid-2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Replace Shear Pins: Ensure shear pins are in good condition and replace them immediately if broken. Use only the correct shear pins specified for your model to prevent damage to the auger and gearbox.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Periodically adjust the skid shoes to ensure proper clearance between the scraper bar and the ground. Adjust them higher for gravel driveways and lower for paved surfaces to prevent damage and optimize snow removal.
History & Background
The Murray 621451X0NA was introduced as a value-oriented option in Murray's snow blower lineup. It aimed to provide reliable two-stage performance at a price point accessible to homeowners. While specific major redesigns are not documented, minor component updates likely occurred during its production run.
Frequently Asked Questions
What engine is in the Murray 621451X0NA?
The Murray 621451X0NA typically uses a Briggs & Stratton engine ranging from 5 to 6 horsepower. It usually features a recoil start, although some variations may have an optional electric start.
What is the clearing width of the 621451X0NA?
The Murray 621451X0NA has a clearing width of 21 inches and an intake height of approximately 12-13 inches.
Is the 621451X0NA a single-stage or two-stage snow blower?
The Murray 621451X0NA is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller throws the snow away from the clearing path. This two-stage system allows it to handle heavier and wetter snow more effectively than a single-stage model.
What are common parts needed for the 621451X0NA?
Common wear parts for the Murray 621451X0NA include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and extends the lifespan of your snow blower.
