Murray 621450X79E Snow Blower Thrower Parts
The Murray 621450X79E is a gas-powered, two-stage snow thrower designed for residential snow removal, likely produced in the early 2000s. This model is known for its dependable performance and ease of use, featuring a generous clearing width that makes quick work of driveways and walkways. Its two-stage design allows it to handle deeper snowfalls compared to single-stage models.
The Murray 621450X79E snow thrower was a popular choice for homeowners seeking a reliable and affordable snow removal solution. While the exact production dates can vary, it was likely manufactured in the early 2000s. It's powered by a Briggs & Stratton gas engine, typically ranging between 5-6 horsepower, though specific HP can vary depending on the exact year and sub-model. Electric start options may have been available on some versions for easier starting in cold weather. This model is a two-stage snow thrower, meaning it uses an auger to gather snow and then an impeller to throw it out the chute. The auger system is designed to break up packed snow and ice. Expect a clearing width around 21-22 inches and an intake height of approximately 12-13 inches, allowing it to handle moderate snowfalls effectively. Throwing distance typically reaches up to 25-30 feet. The drive system is wheel-driven with multiple forward and reverse speeds, providing good maneuverability. Chute rotation is generally manual, and a headlight is often included for improved visibility in low-light conditions. This snow thrower is best suited for paved surfaces and moderate snow depths.
Specifications
| Engine | Briggs & Stratton 5-6 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 12 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 150 lbs |
| Years Produced | Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Replace broken shear pins with the correct type to prevent costly repairs.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface to prevent damage to the scraper blade and surface.
History & Background
The Murray 621450X79E was introduced as a mid-range snow blower offering a balance of power and affordability for homeowners. While specific redesigns are unknown, the core design remained consistent during its production run. It contributed to Murray's reputation for producing accessible and dependable snow removal equipment.
Frequently Asked Questions
What engine is in the Murray 621450X79E?
The Murray 621450X79E is typically equipped with a Briggs & Stratton engine in the 5-6 HP range. Electric start was an option on some models, but this varied.
What is the clearing width of the 621450X79E?
The Murray 621450X79E features a clearing width of approximately 21 inches and an intake height of about 12 inches.
Is the 621450X79E a single-stage or two-stage snow blower?
The Murray 621450X79E is a two-stage snow blower. It uses an auger to collect the snow and then an impeller to throw it out the discharge chute.
What are common parts needed for the 621450X79E?
Common replacement parts for the Murray 621450X79E include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Keeping these parts on hand can minimize downtime during the winter months.
