Murray 621450X49A Snow Blower Thrower Parts
The Murray 621450X49A is a gas-powered, two-stage snow thrower designed for efficient snow removal. Commonly manufactured in the late 2000s and early 2010s, this model features a 21-inch clearing width, making it a popular choice for homeowners needing to clear driveways and walkways. Its two-stage design allows it to handle heavier snowfalls effectively, contributing to its widespread appeal.
The Murray 621450X49A snow blower was a popular model during its production run, offering a balance of power and maneuverability for residential snow removal. It was typically equipped with a Briggs & Stratton engine, often in the range of 5-6.5 HP or approximately 190cc to 205cc, though exact specifications can vary. Some versions featured an optional electric start for easier cold-weather starts. As a two-stage snow blower, the 621450X49A uses an auger to break up the snow and then an impeller to throw it away from the clearing path. The auger is typically serrated for better snow intake. It has a clearing width of 21 inches and an intake height around 12-13 inches, enabling it to handle moderate snow depths. The throwing distance can reach up to 25-30 feet depending on snow conditions. The drive system is wheel-driven, with multiple forward speeds and a reverse speed to enhance maneuverability. The chute rotation is typically controlled manually, allowing the operator to direct the snow discharge. While not always present, some models featured a headlight for improved visibility during early morning or evening snow removal. This model is ideally suited for homeowners dealing with moderate to heavy snowfall on medium-sized driveways and walkways.
Specifications
| Engine | Briggs & Stratton 5-6.5 HP (190-205cc), Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 12-13 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/1 Reverse |
| Fuel Tank | ~1.5 gallons |
| Weight | ~150 lbs |
| Years Produced | Late 2000s - Early 2010s (Approximate) |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear. Replace worn paddles or auger blades to maintain optimal snow throwing performance.
- Check and replace shear pins as needed. Shear pins protect the auger gearbox from damage if the auger encounters a hard object. Use only the correct replacement shear pins.
- Change the engine oil annually or as recommended by the engine manufacturer. Use the correct type and viscosity of oil to ensure proper engine lubrication.
- Use fuel stabilizer in the gasoline, especially before storing the snow blower for the off-season. This prevents fuel degradation and ensures easier starting next winter.
History & Background
The Murray 621450X49A was introduced as a reliable and affordable two-stage snow blower for homeowners. While specific redesign information is limited, Murray focused on maintaining a balance between performance and cost-effectiveness. This model's popularity underscored the demand for a capable snow removal solution that was accessible to a wide range of consumers.
Frequently Asked Questions
What engine is in the Murray 621450X49A?
The Murray 621450X49A typically features a Briggs & Stratton engine in the 5 to 6.5 HP range, equivalent to approximately 190cc to 205cc. Electric start was often offered as an option on some models.
What is the clearing width of the 621450X49A?
The Murray 621450X49A has a clearing width of 21 inches and an intake height of approximately 12-13 inches.
Is the 621450X49A a single-stage or two-stage snow blower?
The Murray 621450X49A is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller throws the snow through the discharge chute.
What are common parts needed for the 621450X49A?
Common wear parts for the Murray 621450X49A include shear pins, drive belts, auger paddles (depending on the specific design), the scraper bar, skid shoes, spark plugs, and fuel filters.
