Murray 621401X85NA Snow Blower Thrower Parts
The Murray 621401X85NA is a popular two-stage gas-powered snow thrower, known for its reliability and ease of use in residential snow removal. Manufactured for several years, this model typically features a 21-inch clearing width and a powerful engine, making it suitable for moderate snowfall. Homeowners favored it for its balance of performance and affordability.
The Murray 621401X85NA snow thrower was a common sight in suburban driveways throughout its production run. While the exact years of production may vary, it's generally accepted that it was available during the late 20th and early 21st centuries. The engine is typically a Briggs & Stratton or Tecumseh gas engine, often in the range of 5-6 horsepower (depending on the specific sub-model or year). Electric start was a common option, enhancing ease of use in cold weather. Being a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it away from the cleared path. This model provides around a 21-inch clearing width and an intake height suitable for handling snowfalls of moderate depth. Expect a throwing distance of up to 25-30 feet under ideal conditions. It employs a wheel-drive system, typically with multiple forward and reverse speeds, controlled by levers on the handle. Chute control is usually manual, allowing you to direct the snow discharge. While not always standard, some versions might include a headlight for improved visibility during early morning or late evening snow removal. Heated grips are not a common feature on this particular model. The Murray 621401X85NA is best suited for paved surfaces like driveways and sidewalks, handling moderate snowfall with ease.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6 HP (Approximate) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | Approximately 12 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approximately 1.5 Gallons |
| Weight | Approximately 150 Lbs |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always keep spare shear pins on hand and replace them immediately if the auger stops turning while the engine is running. Use only the correct shear pins specified for your model.
- Fuel System Maintenance: Use fuel stabilizer in the gasoline, especially before storing the snow blower for the off-season. This prevents fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes to ensure proper clearing height and prevent damage to the auger housing on uneven surfaces. Regularly inspect for wear and replace as needed.
History & Background
The Murray 621401X85NA was introduced as a reliable and affordable option for homeowners needing a capable snow removal solution. While specific redesigns were minimal, engine upgrades and minor feature tweaks may have occurred during its production run. It played a significant role in the residential snow blower market, offering a balance of performance and value.
Frequently Asked Questions
What engine is in the Murray 621401X85NA?
The Murray 621401X85NA typically uses a Briggs & Stratton or Tecumseh gas engine, generally around 5-6 horsepower. Electric start was often available as an option.
What is the clearing width of the 621401X85NA?
The Murray 621401X85NA has a clearing width of approximately 21 inches and an intake height around 12 inches, suitable for moderate snowfalls.
Is the 621401X85NA a single-stage or two-stage snow blower?
The Murray 621401X85NA is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller throws the snow through the chute.
What are common parts needed for the 621401X85NA?
Common replacement parts for the Murray 621401X85NA include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and air filters.
