Murray 621401X54NB Snow Blower Thrower Parts
The Murray 621401X54NB is a gas-powered, two-stage snow blower known for its reliability and ease of use in residential snow removal. Likely manufactured in the late 1990s and early 2000s, this model typically features a 21-inch clearing width, making it suitable for average-sized driveways and walkways. Its popularity stemmed from its balance of power, maneuverability, and affordability for homeowners.
The Murray 621401X54NB snow blower was a common sight in suburban homes for several years, offering a practical solution for dealing with moderate snowfall. While exact production years can vary, it was most likely produced from the late 1990s into the mid-2000s. It's equipped with a gas-powered engine, commonly a Briggs & Stratton or Tecumseh, in the 5-6 HP range. Electric start may have been an option on some models. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. The clearing width is typically 21 inches, with an intake height of around 12-13 inches. Throwing distance can reach up to 20-25 feet depending on snow conditions. The drive system is wheel-driven, usually offering multiple forward speeds and a reverse gear. Chute controls are generally manual, allowing the operator to adjust the direction of the snow discharge. While not all models featured a headlight or heated grips, these were sometimes available. This snow blower is ideal for homeowners dealing with moderate snowfall on paved surfaces like driveways and sidewalks.
Specifications
| Engine | Briggs & Stratton 5-6 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 12-13 inches |
| Throwing Distance | Up to 25 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 150 lbs |
| Years Produced | Late 1990s - Mid 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Always use the correct shear pins for the auger. Using incorrect pins can damage the gearbox. Keep spares on hand.
- Check belt tension periodically. Loose belts can reduce throwing distance and strain the engine. Adjust or replace as needed.
- Change the engine oil annually. Follow the engine manufacturer's recommendations for oil type and change intervals. Use fuel stabilizer for off-season storage.
History & Background
The Murray 621401X54NB was a standard model snow blower introduced to address the needs of homeowners in regions with moderate snowfall. While there were no major redesigns during its production run, slight variations in engine brands and features may have occurred. It represented Murray's commitment to providing affordable and reliable snow removal solutions.
Frequently Asked Questions
What engine is in the Murray 621401X54NB?
The Murray 621401X54NB typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 6 horsepower. Electric start was an optional feature on some models.
What is the clearing width of the 621401X54NB?
The Murray 621401X54NB has a clearing width of 21 inches and an intake height of approximately 12-13 inches.
Is the 621401X54NB a single-stage or two-stage snow blower?
The Murray 621401X54NB is a two-stage snow blower. It uses an auger to gather and break up the snow and then an impeller to throw it out of the chute.
What are common parts needed for the 621401X54NB?
Common replacement parts for the Murray 621401X54NB include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. These parts are subject to wear and tear and should be inspected regularly.
