Murray 621301X89B Snow Blower Thrower Parts
The Murray 621301X89B is a gas-powered, two-stage snow thrower known for its reliability in handling moderate to heavy snowfall. While specific manufacturing years require further verification, it typically featured a clearing width around 21 inches. Its popularity stemmed from its combination of affordability and effective snow removal capabilities, making it a common choice for homeowners during its production run.
The Murray 621301X89B, while production dates vary, was a popular two-stage snow thrower designed for residential use. Typically, it would have been powered by a Briggs & Stratton or Tecumseh engine, likely in the 5-6 horsepower range. An electric start option may have been available on some models. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it. The clearing width is around 21 inches, with an intake height suitable for handling drifts of a moderate depth. Throwing distance would likely be in the 20-30 foot range, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds, enhancing maneuverability. Chute control is typically manual, allowing the operator to direct the snow stream. While features like headlights or heated grips weren't standard on all models, the 621301X89B excels in handling average snowfall amounts on driveways and walkways. It's well-suited for paved or gravel surfaces where its two-stage design prevents the auger from scraping the ground.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-6 HP Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | Approx. 12 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 150 lbs |
| Years Produced | Unknown |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace any worn or damaged components immediately to maintain optimal performance.
- Always use the correct shear pins for your Murray 621301X89B. Using incorrect pins can cause serious damage to the auger gearbox.
- Before storing the snow blower for the off-season, add fuel stabilizer to the fuel tank to prevent fuel deterioration and carburetor issues. Change the oil annually.
- Adjust the skid shoes to the appropriate height for your surface type. This will prevent damage to the auger housing and ensure proper snow removal.
History & Background
The Murray 621301X89B was a fairly common snow blower during its production run, offering a balance of performance and affordability. As a popular model from Murray, it contributed to their reputation for providing reliable snow removal solutions for homeowners. Details on specific redesigns are limited, but it generally retained a consistent design focused on ease of use and effectiveness.
Frequently Asked Questions
What engine is in the Murray 621301X89B?
The Murray 621301X89B typically used a Briggs & Stratton or Tecumseh engine in the 5-6 horsepower range. Some models may have included an electric start option.
What is the clearing width of the 621301X89B?
The Murray 621301X89B has a clearing width of approximately 21 inches and an intake height of around 12 inches.
Is the 621301X89B a single-stage or two-stage snow blower?
The Murray 621301X89B is a two-stage snow blower. It uses an auger to gather and break up the snow and then an impeller to throw it out of the discharge chute.
What are common parts needed for the 621301X89B?
Common replacement parts for the Murray 621301X89B include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
