Murray 6210700X85N-18-2818-28 Snow Blower Thrower Parts
The Murray 6210700X85N snow blower, also known as 18-2818-28, was a popular model known for its reliable gas engine and efficient snow clearing capabilities. Typically manufactured in the late 1990s and early 2000s, this two-stage snow thrower boasts a clearing width ideal for medium to large driveways and walkways. Its robust design made it a favorite among homeowners needing dependable winter performance.
The Murray 6210700X85N (18-2818-28) snow blower represents a solid option for residential snow removal. While precise years of production are subject to specific manufacturing runs, it generally appeared in the late 90s/early 2000s snow blower market. It is powered by a Briggs & Stratton or Tecumseh gas engine, likely in the 5-8 HP range, though specifications varied. Electric start might have been an available option on certain sub-models. This is a two-stage snow blower, meaning it utilizes an auger to break up the snow and an impeller to throw it. The auger system is typically serrated to improve snow intake. The clearing width is around 21-22 inches, with an intake height of approximately 16-20 inches. Throwing distance can reach up to 25-30 feet depending on snow conditions. The drive system is wheel-driven, with several forward speeds and typically one or two reverse speeds. The chute control is generally manual, allowing the user to adjust the direction of the snow discharge. A headlight is usually present for improved visibility during early morning or evening snow clearing. It is best suited for moderate to heavy snowfall on paved surfaces like driveways and walkways.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-22 inches |
| Intake Height | 16-20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/1-2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s/Early 2000s |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified for your model.
- Fuel Stabilization: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank. This prevents fuel from degrading and causing starting problems when you need the snow blower again.
History & Background
The Murray 6210700X85N model entered the market as a reliable and affordable two-stage snow blower. Its simple design and dependable engine made it a popular choice for homeowners dealing with moderate to heavy snowfall. While specific updates are undocumented, its core functionality remained consistent throughout its production run.
Frequently Asked Questions
What engine is in the Murray 6210700X85N - 18-2818-28?
The Murray 6210700X85N snow blower is typically powered by a Briggs & Stratton or Tecumseh engine in the 5-8 HP range. Electric start was an option on some models.
What is the clearing width of the 6210700X85N - 18-2818-28?
The clearing width of the Murray 6210700X85N is approximately 21-22 inches, with an intake height of 16-20 inches.
Is the 6210700X85N - 18-2818-28 a single-stage or two-stage snow blower?
The Murray 6210700X85N is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to powerfully throw the snow away from the clearing path.
What are common parts needed for the 6210700X85N - 18-2818-28?
Common replacement parts for the Murray 6210700X85N include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and timely replacement of these parts will ensure the snow blower operates efficiently.
