Murray 620301X54NC Snow Blower Thrower Parts
The Murray 620301X54NC is a gas-powered, two-stage snow blower known for its reliability and ability to handle moderate to heavy snowfall. Likely manufactured in the early 2000s, this model typically featured a clearing width of around 26 inches. Its robust engine and two-stage design made it a popular choice for homeowners needing a dependable machine to clear driveways and walkways.
The Murray 620301X54NC snow blower was a common model for residential snow removal. While the exact production years can vary, this model was primarily manufactured in the early 2000s. The 620301X54NC is typically powered by a Briggs & Stratton or Tecumseh gas engine, ranging from 8 to 10 HP, offering ample power for most residential needs. Electric start was often available as an option. Being a two-stage snow blower, it utilizes an auger to break up and collect snow, then an impeller to throw it through the discharge chute. The clearing width typically measures around 26 inches, with an intake height of about 20-21 inches, allowing it to handle deeper snowdrifts. Expect a throwing distance of up to 30-40 feet depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds, which are controlled via levers near the handle. The chute is typically controlled manually, allowing the operator to adjust the direction of the snow discharge. While not always standard, some models may include a headlight for improved visibility during early morning or evening snow removal. Heated grips and track drive are not typically found on this model. This snow blower is ideal for homeowners dealing with moderate to heavy snow accumulation on driveways and walkways. Its two-stage design ensures efficient snow removal, even in heavier, wetter snow conditions.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Replace Shear Pins: Ensure shear pins are in good condition and replace them if they are broken or sheared off. Always use the correct replacement shear pins to protect the auger and gearbox.
- Fuel Stabilization: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel from degrading and causing carburetor problems.
- Check Skid Shoe Adjustment: Adjust the skid shoes to the correct height for your surface. This prevents damage to the scraper bar and the surface you're clearing.
History & Background
The Murray 620301X54NC was part of Murray's line of snow blowers designed for residential use. It offered a balance of power and affordability, making it a popular choice among homeowners. There were no major redesigns of this model during its production run.
Frequently Asked Questions
What engine is in the Murray 620301X54NC?
The Murray 620301X54NC typically uses a Briggs & Stratton or Tecumseh engine, ranging from 8 to 10 horsepower. Electric start was often an available option.
What is the clearing width of the 620301X54NC?
The clearing width of the Murray 620301X54NC is approximately 26 inches, and the intake height is about 21 inches.
Is the 620301X54NC a single-stage or two-stage snow blower?
The Murray 620301X54NC is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 620301X54NC?
Common parts needed for the Murray 620301X54NC include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
