Murray 620301X4NA Snow Blower Thrower Parts
The Murray 620301X4NA is a gas-powered, two-stage snow thrower designed for both residential and light commercial use. While exact production years can vary, it was a popular model known for its reliable performance and efficient snow removal capabilities. Typically featuring a clearing width around 26 inches, this snow blower offers a good balance of power and maneuverability for tackling moderate to heavy snowfall.
The Murray 620301X4NA is a two-stage snow thrower designed for clearing driveways, sidewalks, and other surfaces of snow. While specific years of production should be confirmed, it falls within the Murray snow blower lineup known for its value and performance. It's typically powered by a Briggs & Stratton gas engine, usually in the 205cc to 250cc range (around 6-8 HP). Many models offer an electric start option for added convenience, especially in cold weather. The two-stage design utilizes an auger to break up the snow and then an impeller to throw it away from the machine. This model typically has a clearing width of around 26 inches, allowing it to handle wider paths in fewer passes. The intake height is around 20-21 inches. Throwing distance varies depending on snow conditions but can reach up to 30-40 feet. The drive system typically uses wheels with multiple forward and reverse speeds, providing good traction and control. Chute rotation is typically manual, controlled by a handle on the dashboard. A headlight is often included for enhanced visibility during early morning or evening snow removal. While heated grips aren't standard, its robust design is suited for moderate to heavy snowfall on paved surfaces. This snow blower is well-suited for homeowners and property managers dealing with medium-sized areas and moderate snow accumulations.
Specifications
| Engine | Briggs & Stratton 205cc (6.5 HP) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 170 lbs |
| Years Produced | Likely Late 1990s - Early 2000s (Verify) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage. Keep spare shear pins on hand and replace them immediately if broken. Use only the correct shear pin type.
- Perform Regular Oil Changes: Change the engine oil according to the manufacturer's recommendations (typically every 25-50 hours of use or annually). Use the correct oil type for cold weather operation.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray 620301X4NA snow blower was introduced as a reliable and affordable option in the Murray snow removal lineup. While specific redesigns are not commonly documented, Murray snow blowers in this era aimed to balance cost-effectiveness with essential features. This model offered a practical solution for homeowners needing a capable two-stage snow blower without a premium price tag.
Frequently Asked Questions
What engine is in the Murray 620301X4NA?
The Murray 620301X4NA is typically powered by a Briggs & Stratton engine around 205cc and 6.5 horsepower. Some models may have an electric start option.
What is the clearing width of the 620301X4NA?
The Murray 620301X4NA has a clearing width of approximately 26 inches and an intake height of around 21 inches.
Is the 620301X4NA a single-stage or two-stage snow blower?
The Murray 620301X4NA is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller throws the snow out of the chute.
What are common parts needed for the 620301X4NA?
Common wear parts include shear pins (for the auger), belts (auger belt and drive belt), scraper bar, skid shoes, spark plugs, and fuel filters. Auger paddles may need replacement over time depending on use.
