Murray 620301X4C Snow Blower Thrower Parts
The Murray 620301X4C is a gas-powered, two-stage snow thrower known for its reliability and ease of use in residential snow removal. Typically manufactured in the early to mid-2000s, it features a 26-inch clearing width, making it a popular choice for homeowners dealing with moderate to heavy snowfall. Its robust design and readily available parts have contributed to its enduring popularity.
The Murray 620301X4C snow blower was a staple in the Murray lineup for several years, primarily during the early to mid-2000s. It's powered by a Briggs & Stratton engine, typically around 8-10 HP, providing ample power for tackling substantial snowfalls. While electric start wasn't always standard, it was often offered as an option, enhancing user convenience. As a two-stage snow blower, the 620301X4C utilizes a robust auger system to break up the snow and an impeller to forcefully discharge it. The 26-inch clearing width allows for efficient snow removal, while the intake height of around 20-21 inches enables it to handle deeper drifts. Expect a throwing distance of up to 30-35 feet, ensuring snow is cleared away from the path. This model uses a wheel-drive system with multiple forward and reverse speeds, allowing for good maneuverability. The chute is typically controlled manually, and while heated grips were not standard, many units did feature a headlight for enhanced visibility in low-light conditions. The Murray 620301X4C is ideally suited for homeowners dealing with moderate to heavy snowfalls on medium to large driveways and walkways.
Specifications
| Engine | Briggs & Stratton 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Early to Mid-2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pins are Critical: Always use the correct shear pins and keep spares on hand. Shear pins protect the auger gearbox from damage if it encounters a hard object.
- Fuel Stabilizer is Your Friend: Use fuel stabilizer in the off-season to prevent fuel from degrading and causing carburetor problems. Drain the carburetor if storing for extended periods.
- Adjust Skid Shoes: Adjust the skid shoes to prevent damage to the pavement or gravel surfaces. Set them higher for gravel and lower for paved surfaces.
History & Background
The Murray 620301X4C was introduced as a reliable and affordable option for homeowners needing a capable snow blower. While specific redesigns are not widely documented, the model remained consistent throughout its production run, focusing on durability and user-friendliness. It represents a solid value proposition in the residential snow removal market.
Frequently Asked Questions
What engine is in the Murray 620301X4C?
The Murray 620301X4C typically features a Briggs & Stratton engine, ranging from 8 to 10 horsepower. Some models may have had an optional electric start feature.
What is the clearing width of the 620301X4C?
The Murray 620301X4C has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the 620301X4C a single-stage or two-stage snow blower?
The Murray 620301X4C is a two-stage snow blower. It uses an auger to collect and break up the snow, and an impeller to forcefully discharge it through the chute.
What are common parts needed for the 620301X4C?
Common wear parts for the Murray 620301X4C include shear pins, belts (auger and drive), auger paddles (though less common on two-stage), scraper bar, skid shoes, spark plugs, and fuel filters.
