Murray 536-889253 Snow Blower Thrower Parts
The Murray 536.889253 is a gas-powered, two-stage snow blower popular for its reliable performance in residential snow removal. While specific production years may vary, this model typically features a clearing width around 26 inches. Known for its powerful engine and effective snow throwing capabilities, it's a workhorse designed to tackle moderate to heavy snowfall, making it a favorite among homeowners and property managers.
The Murray 536.889253 snow blower is a two-stage machine designed for efficient snow removal on driveways and sidewalks. Specific production years are not definitively available, but it was likely produced in the late 1990s and early 2000s. The engine is typically a Briggs & Stratton or Tecumseh engine, ranging from 8 to 10 HP. Electric start was offered on some versions for easier starting in cold weather. As a two-stage blower, it utilizes an auger to collect snow and then an impeller to throw it away from the clearing path. The clearing width is approximately 26 inches with an intake height of around 20 inches. It could throw snow up to 30-40 feet depending on conditions. The drive system is wheel-driven with multiple forward and reverse speeds, providing good maneuverability. The chute is manually controlled, allowing the operator to direct the snow stream. A headlight is often included for improved visibility in low-light conditions. The Murray 536.889253 is well-suited for handling moderate to heavy snowfalls on medium to large-sized properties.
Specifications
| Engine | Briggs & Stratton/Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 Gallons (Estimate) |
| Weight | 200 Lbs (Estimate) |
| Years Produced | Late 1990s-Early 2000s (Estimate) |
Maintenance Tips
- Inspect the auger and impeller regularly: Look for any signs of wear, damage, or bending. Replace worn paddles or a damaged impeller to maintain optimal throwing performance.
- Replace shear pins as needed: Shear pins protect the auger and gearbox from damage if the auger hits a hard object. Keep extra shear pins on hand and replace them immediately if they break.
- Use fuel stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems next season.
History & Background
The Murray 536.889253 snow blower was a popular model from Murray, known for providing reliable snow removal at a reasonable price point. This model offered a balance of power and maneuverability suitable for many residential users. While exact redesign dates aren't readily available, Murray focused on incremental improvements to engine performance and user convenience throughout its production run.
Frequently Asked Questions
What engine is in the Murray 536.889253?
The Murray 536.889253 typically uses a Briggs & Stratton or Tecumseh gas engine, ranging from 8 to 10 HP. Some models were equipped with an optional electric start for added convenience.
What is the clearing width of the 536.889253?
The Murray 536.889253 has a clearing width of approximately 26 inches and an intake height of around 20 inches, allowing it to handle a good amount of snow in each pass.
Is the 536.889253 a single-stage or two-stage snow blower?
The Murray 536.889253 is a two-stage snow blower. This means it uses an auger to collect the snow and then an impeller to throw it out of the chute, making it more powerful and capable of handling heavier snow than a single-stage model.
What are common parts needed for the 536.889253?
Common wear parts for the Murray 536.889253 include shear pins (to protect the auger), drive belts (for the auger and impeller), auger paddles (to gather snow), the scraper bar (to clean the pavement), skid shoes (to adjust the height), spark plugs, and fuel filters.
