Murray 536-881800 Snow Blower Thrower Parts
The Murray 536.881800 is a robust gas-powered, two-stage snow thrower likely manufactured in the late 1990s and early 2000s. Known for its dependable performance and durable construction, this model typically features a clearing width around 26 inches, making it a popular choice for homeowners dealing with moderate to heavy snowfall on driveways and walkways. Its two-stage design allows it to handle deeper snow and throw it further than single-stage models.
The Murray 536.881800 snow thrower was a popular model known for its reliability and straightforward design. While specific production years are difficult to pinpoint, it was likely produced in the late 1990s and early 2000s. This model is typically powered by a Briggs & Stratton or Tecumseh engine, usually around 8-10 HP, offering ample power for most residential snow removal tasks. Some versions may have included an optional electric start for easier starting in cold weather. As a two-stage snow thrower, the 536.881800 uses an auger to break up and collect snow, then an impeller to forcefully discharge it through the chute. Expect a clearing width around 26 inches and an intake height of approximately 20-21 inches, enabling it to handle sizable snowfalls. The throwing distance can reach up to 30-40 feet, depending on snow conditions. It usually features a wheel-drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute rotation is typically manually controlled, allowing the user to direct the snow stream. While some high-end models might feature a headlight, heated grips were not common on this particular Murray model. This snow thrower is well-suited for paved driveways, sidewalks, and other surfaces where moderate to heavy snowfall accumulation is expected.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if they break. Using incorrect shear pins can damage the auger or gearbox.
- Oil Changes and Fuel Stabilizer: Change the engine oil at least once a year or after every 50 hours of use. Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes to match the surface you are clearing. Raise them for gravel or uneven surfaces and lower them for paved driveways and sidewalks.
History & Background
The Murray 536.881800 snow thrower was a staple in Murray's lineup, known for providing homeowners with a cost-effective and reliable snow removal solution. This model was a popular choice during its production run and remains a viable option today due to its robust design and availability of replacement parts. Though details about major redesigns are limited, small improvements may have been incorporated throughout its production years.
Frequently Asked Questions
What engine is in the Murray 536.881800?
The Murray 536.881800 is typically equipped with either a Briggs & Stratton or Tecumseh engine, ranging from 8 to 10 horsepower. Some models may have featured an optional electric start for added convenience.
What is the clearing width of the 536.881800?
The Murray 536.881800 has a clearing width of approximately 26 inches and an intake height of about 21 inches, allowing it to handle significant snowfalls.
Is the 536.881800 a single-stage or two-stage snow blower?
The Murray 536.881800 is a two-stage snow blower. This means it uses an auger to break up and gather the snow, and then an impeller to forcefully throw the snow through the discharge chute. This design allows it to handle deeper snow and throw it further than a single-stage model.
What are common parts needed for the 536.881800?
Common replacement parts for the Murray 536.881800 include shear pins (protecting the auger), drive belts, auger paddles (if equipped), scraper bar (at the base of the housing), skid shoes, spark plugs, and fuel filters.
