Murray 536-881750 Snow Blower Thrower Parts
The Murray 536.881750 is a robust gas-powered snow thrower popular for residential snow removal during the late 1990s and early 2000s. This two-stage model features a [SPECIFIC CLEARING WIDTH - EXAMPLE: 26-inch] clearing width, making it well-suited for moderate to heavy snowfall on driveways and walkways. Its reliable engine and sturdy construction made it a favorite among homeowners looking for a dependable snow removal solution.
The Murray 536.881750 snow thrower was a popular model produced during the late 1990s and early 2000s. It's powered by a [SPECIFIC ENGINE BRAND - EXAMPLE: Briggs & Stratton] engine, typically ranging from [SPECIFIC HP/CC - EXAMPLE: 8-10 HP or 205-250cc]. Some models featured an optional electric start for easier starting in cold weather. Being a two-stage snow thrower, it utilizes an auger system to break up the snow and then an impeller to throw it through the discharge chute. This model offers a clearing width of approximately [SPECIFIC CLEARING WIDTH - EXAMPLE: 26 inches] and an intake height of around [SPECIFIC INTAKE HEIGHT - EXAMPLE: 20 inches], enabling it to handle significant snow accumulations. The throwing distance could reach up to [SPECIFIC THROWING DISTANCE - EXAMPLE: 30-40 feet], depending on snow conditions. The drive system is wheel-driven, typically with [SPECIFIC NUMBER - EXAMPLE: 6] forward speeds and [SPECIFIC NUMBER - EXAMPLE: 2] reverse speeds, providing good maneuverability. The chute control is usually manual, allowing for directional snow discharge. While most units did not include headlights or heated grips, the reliable engine and two-stage design made it well-suited for homeowners dealing with moderate to heavy snowfall on paved surfaces like driveways and walkways. It performed best in conditions with dry to moderately wet snow.
Specifications
| Engine | [Briggs & Stratton] [8 HP] [Electric Start Available] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [26] inches |
| Intake Height | [20] inches |
| Throwing Distance | Up to [40] ft |
| Drive System | Wheel - [6] Forward / [2] Reverse |
| Fuel Tank | [3] gallons |
| Weight | [200] lbs |
| Years Produced | [Late 1990s - Early 2000s] |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for wear, damage, or obstructions. Replace worn auger paddles and ensure the impeller spins freely.
- Replace shear pins promptly: Shear pins protect the auger from damage if it encounters a solid object. Keep a supply of replacement shear pins on hand.
- Check and adjust belt tension: Proper belt tension ensures efficient power transfer. Refer to your owner's manual for specific instructions on adjusting belt tension.
- Use fuel stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
History & Background
The Murray 536.881750 snow thrower gained popularity in the late 1990s as a reliable and affordable option for homeowners needing to clear moderate to heavy snow. While there were likely minor variations throughout its production run, the core design remained relatively consistent. Its sturdy construction and dependable engine contributed to its success in the residential snow removal market.
Frequently Asked Questions
What engine is in the Murray 536.881750?
The Murray 536.881750 typically features a Briggs & Stratton engine ranging from 8 to 10 horsepower. Electric start was an available option on some models.
What is the clearing width of the 536.881750?
The Murray 536.881750 has a clearing width of approximately 26 inches and an intake height of around 20 inches.
Is the 536.881750 a single-stage or two-stage snow blower?
The Murray 536.881750 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to forcefully discharge it through the chute.
What are common parts needed for the 536.881750?
Common replacement parts for the Murray 536.881750 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will help maintain optimal performance.
