Murray 536-881501 Snow Blower Thrower Parts
The Murray 536.881501 is a popular gas-powered snow thrower, known for its reliability and affordability, manufactured in the late 1990s and early 2000s. This model features a two-stage design with a 26-inch clearing width, making it suitable for moderate to heavy snowfall on residential driveways and walkways. Its straightforward operation and readily available parts contributed to its widespread use among homeowners.
The Murray 536.881501 snow blower was a staple in many households during its production run. While exact production dates are hard to pinpoint, it was likely manufactured from the late 1990s through the early 2000s. It typically features a Briggs & Stratton or Tecumseh engine around 8-10 HP, with some models offering an electric start option for easier starting in cold weather. Being a two-stage snow blower, the 536.881501 utilizes an auger to break up the snow and then an impeller to throw it away. The clearing width is approximately 26 inches, and the intake height is around 20-21 inches, allowing it to handle significant snowfall. The throwing distance can reach up to 30-40 feet depending on the snow conditions. This model uses a wheel drive system with multiple forward and reverse speeds, providing good traction. The chute control is typically manual, allowing the user to direct the snow stream. While some models may have a headlight, heated grips were not a standard feature. The Murray 536.881501 is ideal for homeowners dealing with moderate to heavy snowfall on paved surfaces.
Specifications
| Engine | Briggs & Stratton 8 HP with Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.6 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace any worn or damaged parts to maintain optimal performance.
- Always use the correct shear pins for the auger. Using the wrong shear pins can damage the gearbox or auger shaft.
- Check belt tension regularly and adjust as needed. Loose belts can cause slippage and reduce throwing distance. Replace belts if they are cracked or worn.
- Use fuel stabilizer in the gasoline before storing the snow blower for the off-season. This will prevent fuel from breaking down and causing starting problems next winter. Change the oil annually.
History & Background
The Murray 536.881501 snow blower was introduced as a reliable and affordable option for homeowners needing to clear snow from their driveways and walkways. While there weren't any major redesigns during its production run, subtle improvements were likely made to the engine and other components. Its popularity stemmed from its ease of use and relatively low cost, making it a common sight in suburban neighborhoods.
Frequently Asked Questions
What engine is in the Murray 536.881501?
The Murray 536.881501 typically uses a Briggs & Stratton engine, usually around 8 horsepower. Some models may also use a Tecumseh engine. Some versions come with an electric start option for easier starting in cold conditions.
What is the clearing width of the 536.881501?
The Murray 536.881501 has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the 536.881501 a single-stage or two-stage snow blower?
The Murray 536.881501 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out of the chute. This design allows it to handle heavier and deeper snow compared to single-stage models.
What are common parts needed for the 536.881501?
Common parts needed for the Murray 536.881501 include shear pins (auger and impeller), belts (auger and drive), the scraper bar, skid shoes, spark plugs, and fuel filters. Auger paddles may also need replacement over time due to wear and tear.
