Murray 1695744-C950-52951-0 Snow Blower Thrower Parts
The Murray 1695744 (C950-52951-0) snow blower, likely manufactured in the late 1990s or early 2000s, is a popular two-stage gas-powered snow thrower known for its reliability and robust snow clearing capabilities. This model typically features a 26-inch clearing width, making it suitable for handling moderate to heavy snowfall on residential driveways and walkways. Its affordability and ease of use contributed to its popularity among homeowners.
The Murray 1695744 (C950-52951-0) snow blower was a widely distributed model aimed at the residential market, likely produced between the late 1990s and early 2000s. It typically utilizes a Tecumseh engine, with horsepower ranging from 5-7 HP depending on the exact configuration. Many models included an optional electric start for easier cold-weather starts. As a two-stage snow blower, the Murray 1695744 employs an auger system to break up snow and feed it into a high-speed impeller, which then discharges the snow through the chute. The clearing width is typically around 26 inches, with an intake height of approximately 20 inches, allowing it to handle substantial snowfalls. Throwing distances can reach up to 30-40 feet, depending on snow conditions. The drive system typically features wheels with multiple forward and reverse speeds, providing good traction and maneuverability. The chute rotation is usually manually controlled, allowing the operator to direct the snow stream. While not typically equipped with a headlight or heated grips, its straightforward design and dependable performance made it a popular choice for homeowners needing to clear driveways and walkways in moderate to heavy snow conditions.
Specifications
| Engine | Tecumseh 5-7 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4 Forward/2 Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for any damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Always use the correct shear pins for the auger. These pins are designed to break under excessive stress, protecting the drive train from damage.
- Check the belt tension periodically and adjust as needed. Loose belts can cause slippage and reduced throwing distance.
- At the end of the season, drain the fuel or add fuel stabilizer to prevent fuel degradation. This will help ensure easy starting next winter.
History & Background
The Murray 1695744 (C950-52951-0) snow blower was part of Murray's line of affordable and reliable snow removal equipment. It was introduced during a time when two-stage snow blowers were becoming increasingly popular for residential use due to their superior snow clearing performance compared to single-stage models. While not a groundbreaking innovation, it solidified Murray's position as a provider of dependable snow removal solutions.
Frequently Asked Questions
What engine is in the Murray 1695744 - C950-52951-0?
The Murray 1695744 typically uses a Tecumseh engine, ranging from 5 to 7 horsepower. Some models were equipped with an optional electric start for easier starting in cold weather.
What is the clearing width of the 1695744 - C950-52951-0?
The Murray 1695744 snow blower has a clearing width of 26 inches and an intake height of approximately 20 inches.
Is the 1695744 - C950-52951-0 a single-stage or two-stage snow blower?
The Murray 1695744 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 1695744 - C950-52951-0?
Common replacement parts for the Murray 1695744 include shear pins, belts (auger and drive), auger paddles (rubber/composite), the scraper bar, skid shoes, spark plugs, and fuel filters.
