Murray 1695737-C950-52948-0 Snow Blower Thrower Parts
The Murray 1695737 - C950-52948-0 is a robust snow thrower designed for both residential and light commercial use. Although specific production years are difficult to pinpoint, this model features a gas-powered engine and a clearing width suitable for moderate to heavy snowfall. Its popularity stemmed from its reliable performance and user-friendly design, making it a staple for homeowners needing a dependable snow removal solution.
The Murray 1695737 - C950-52948-0 snow thrower, while specifics on exact production years are limited, was designed as a practical snow removal solution for a range of users. Typically, these models featured a gas-powered engine. While the exact brand and HP/CC requires further research based on specific engine codes, these snow throwers often used Briggs & Stratton or Tecumseh engines with electric start options available on some models. This is a two-stage snow thrower, utilizing an auger system to break up the snow and an impeller to throw it through the chute. Expect a clearing width between 24 to 26 inches and an intake height capable of handling substantial snowfall (around 20-21 inches). Throwing distance can reach up to 30 feet depending on snow conditions. These models typically use a wheel-drive system with multiple forward and reverse speeds, offering good maneuverability. Chute controls were typically manual, allowing the operator to adjust the direction and angle of the snow stream. A headlight was common for enhanced visibility during early morning or late evening snow removal. While heated grips were not a standard feature on this model, the Murray 1695737 - C950-52948-0 is ideal for handling moderate to heavy snowfall on driveways, walkways, and sidewalks.
Specifications
| Engine | [Briggs & Stratton or Tecumseh] [5-8 HP Estimated] [Electric Start Y/N - Check Model] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [24-26] inches |
| Intake Height | [20-21] inches |
| Throwing Distance | Up to [30] ft |
| Drive System | [Wheel] - [4-6 Forward/1-2 Reverse] |
| Fuel Tank | [Varies - Check Manual] gallons |
| Weight | [150-200] lbs |
| Years Produced | [Likely Late 1990s - Early 2000s] |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts immediately to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them promptly if they break. Shear pins protect the snow blower from damage if the auger encounters a hard object.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.
- Skid Shoe Adjustment: Adjust the skid shoes to match the surface being cleared. Raise them for gravel or uneven surfaces and lower them for paved surfaces to prevent damage to the surface and the scraper bar.
History & Background
The Murray 1695737 - C950-52948-0 snow thrower was likely introduced in the late 1990s or early 2000s as part of Murray's consumer-grade snow removal lineup. While specific redesign information is limited, Murray aimed to provide reliable and affordable snow removal solutions, contributing to its popularity among homeowners.
Frequently Asked Questions
What engine is in the Murray 1695737 - C950-52948-0?
The Murray 1695737 - C950-52948-0 typically uses a Briggs & Stratton or Tecumseh gas engine, with horsepower ranging from approximately 5 to 8 HP. Some models may have an electric start option; refer to your specific model's engine code for exact specifications.
What is the clearing width of the 1695737 - C950-52948-0?
The clearing width of the Murray 1695737 - C950-52948-0 snow blower is generally between 24 and 26 inches, allowing for efficient snow removal. The intake height is approximately 20 to 21 inches, enabling it to handle substantial snow depths.
Is the 1695737 - C950-52948-0 a single-stage or two-stage snow blower?
The Murray 1695737 - C950-52948-0 is a two-stage snow blower. It utilizes an auger to break up and collect the snow, and then an impeller to forcefully discharge the snow through the chute.
What are common parts needed for the 1695737 - C950-52948-0?
Common wear parts for the Murray 1695737 - C950-52948-0 include shear pins, drive belts, auger belts, auger paddles, the scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts will help maintain optimal performance.
