Murray 1695732-BRUTE Snow Blower Thrower Parts
Shop Murray 1695732-BRUTE Snow Blower Thrower parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Murray 1695732, often branded as BRUTE, is a popular gas-powered snow thrower designed for tackling moderate to heavy snowfall. While exact production years may vary, this model is typically a two-stage snow blower with a robust clearing width suitable for both residential driveways and smaller commercial properties. Its reliable engine and effective snow throwing capabilities made it a favorite among homeowners seeking a dependable snow removal solution.
About the 1695732 - BRUTE
The Murray 1695732 BRUTE snow blower was a widely distributed model aimed at both residential and light commercial users. While precise years of production are difficult to pinpoint without specific serial number data, these models were prevalent throughout the late 1990s and early 2000s. Typically powered by a Briggs & Stratton or Tecumseh gas engine, these engines ranged from 5 to 8 horsepower, offering sufficient power to handle moderate to heavy snowfalls. Electric start options were often available. As a two-stage snow blower, the 1695732 utilizes an auger to collect snow and then an impeller to throw it through the discharge chute. The auger system is designed with shear pins to protect the engine from damage if it encounters a solid object. The clearing width usually ranged from 24 to 26 inches, with an intake height of approximately 20-21 inches, allowing it to handle substantial snow drifts. Throwing distance varied depending on snow conditions but could reach up to 30-35 feet. Drive systems were generally wheel-driven with multiple forward and reverse speeds, providing good maneuverability. Chute controls were typically manual, requiring the operator to physically adjust the direction of the snow discharge. Headlights were a common feature to improve visibility in low-light conditions. The 1695732 is ideal for use in regions that experience moderate to heavy snowfalls and is well-suited for clearing driveways, sidewalks, and small parking lots.
1695732 - BRUTE Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start Option Available |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30-35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 180-220 lbs |
| Years Produced | Late 1990s - Early 2000s |
1695732 - BRUTE Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged components to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger system from damage. Inspect them regularly and replace them immediately if broken. Always use the correct shear pins specified for your model.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.
1695732 - BRUTE History & Background
The Murray 1695732 BRUTE snow blower entered the market as a reliable and affordable option for homeowners needing to clear snow. While not revolutionary in design, its dependability and widespread availability made it a popular choice. Over its production run, there were likely minor cosmetic or component updates, but the core design and functionality remained consistent.
Frequently Asked Questions
Which motion drive belt fits the Murray 1695732 BRUTE snow blower?
The recommended motion drive belt for the Murray 1695732 BRUTE is 579932 - Belt, Motion Drive.
What auger drive belt is suitable for the Murray 1695732 BRUTE?
For the Murray 1695732 BRUTE, the correct auger drive belt is 585416 - Belt, Bracket Auger Drive.
What drive belts are needed for the Murray 1695732 BRUTE snow blower?
The Murray 1695732 BRUTE uses different belts for motion and auger drive. The motion drive belt is 579932 - Belt, Motion Drive, and the auger drive belt is 585416 - Belt, Bracket Auger Drive.
What are common wear parts for the Murray 1695732 BRUTE snow blower?
Key wear parts for the Murray 1695732 BRUTE include the motion drive belt, such as 579932 - Belt, Motion Drive, and the auger drive belt, like 585416 - Belt, Bracket Auger Drive. Regular inspection and replacement of these will keep your snow blower running smoothly.










