Murray 1695722 Snow Blower Thrower Parts
The Murray 1695722 is a robust gas-powered snow thrower designed for both residential and light commercial use. While the exact years of production may vary, this model generally features a two-stage design and a substantial clearing width, making it a popular choice for tackling moderate to heavy snowfall. Known for its reliable engine and durable construction, the 1695722 offered a balance of power and maneuverability for effective snow removal.
The Murray 1695722 snow thrower was a popular model designed for efficient snow removal during its production run. While the exact years are difficult to pinpoint without more detailed records, it's likely this model was manufactured in the late 1990s or early 2000s. Typically, the 1695722 is powered by a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. Many models offered an optional electric start for added convenience. As a two-stage snow blower, it utilizes a robust auger system to break up snow and an impeller to throw it through the discharge chute. Expect a clearing width between 24 and 26 inches, and an intake height around 20-21 inches, enabling it to handle deeper snow. Throwing distances can reach up to 30-40 feet, depending on snow conditions. The drive system usually features multiple forward and reverse speeds, providing good control on various surfaces. Chute control is typically manual, allowing the operator to adjust the direction of the snow stream. While not all units had a headlight or heated grips, these were occasionally offered as optional features. The Murray 1695722 is best suited for paved driveways, sidewalks, and other surfaces where moderate to heavy snowfall accumulates.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Varies, typically around 1.5 gallons |
| Weight | Approximately 150-200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Shear Pins: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified for your model.
- Fuel System: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues. Drain the carburetor bowl for best results.
- Oil Changes: Change the engine oil at the recommended intervals (usually annually) to ensure proper lubrication and engine longevity. Refer to your engine's owner's manual for specific oil type and change frequency.
History & Background
The Murray 1695722 snow thrower was part of Murray's lineup of reliable and affordable snow removal equipment. This model aimed to provide homeowners with a powerful and efficient solution for clearing snow. While specific redesigns are difficult to track, Murray consistently strived to improve engine performance and durability across their snow blower models.
Frequently Asked Questions
What engine is in the Murray 1695722?
The Murray 1695722 typically uses a Briggs & Stratton or Tecumseh engine in the 5-8 HP range. Some models may have offered an electric start option for easier starting in cold weather.
What is the clearing width of the 1695722?
The clearing width of the Murray 1695722 is typically between 24 and 26 inches, with an intake height of around 20-21 inches.
Is the 1695722 a single-stage or two-stage snow blower?
The Murray 1695722 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow through the discharge chute. This two-stage system allows it to handle heavier and deeper snow compared to single-stage models.
What are common parts needed for the 1695722?
Common replacement parts for the Murray 1695722 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and oil filters (if equipped).
